Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron AM4301 - Quad Port SFP Interface AdvancedMC Module

Quad 1000Base-X SFP, Cost Optimized Design

Introduction

The AM4311 is a single-width AMC module offering 4x 1000Base-X SFP interfaces at the front panel. The main function of this module is to direct-connect GbE ports from an AMC connector of an AMC carrier or a MicroTCA system to the front. The AM4311 selects 4 of 8 GbE ports from the AMC connector.

By using the AM4311 either in a ?TCA system or on an AMC carrier the overall available uplink GbEinterfaces in the system can be increased.

Specification

Ethernet/WLAN

Interface(s)2x 4 GbE ports: AMC port 0,1, 4, 20 (Quad-Lane A) and AMC port 8, 9, 10, 11 (Quad-Lane B)
Either Quad-Lane A or B can be selected via software (IPMI OEM-command) to be directed to the front panel
Connection(s)Front Interfaces
• Gigabit Ethernet 4x SFP
• LEDs 3 AMC management LEDs (Hot Swap, Out-of-Service, Health)

General

ExpansionAMC: PICMG® AMC.0, Advanced Mezzanine Card Specifi cation R2.0, PICMG® AMC.2 AMC Gigabit Ethernet R1.0
MicroTCA: PICMG® MTCA.0 Micro Telecommunications Computing Architecture R1.0
IPMI: IPMI - Intelligent Platform Management Interface Specifi cation, V1.5
Electrical12 V Payload Power, 3.3 V Management Power
Typ. 4.5 W power consumption
MechanicalSingle-width, mid-size, 180.6 mm x 73.5 mm
TemperatureOperating: 0 to +60°C at air flow: 20 CFM,
Non-operating: -40 to +85°C
HumidityOperating: 15%-90% (non-condensing) at 0 to 55°C
Non-Operating: 5%-95% (non-condensing) at -40 to 70°C
Weight100 grams
VibrationAccording to IEC 60068-2-6, Bellcore GR-63, Section 4.4 and MIL-STD-810E, Method 514:
Operating:
• 5Hz to 100Hz: 1G @ 0.25 Octave/minute
• 100HZ to 500Hz: 1G @ 1 Octave/minute
• 5Hz @ 0.01 g2 /Hz to 20 Hz @ 0.02 g2 /Hz (slope up)
• 20Hz to 500 Hz @ 0.02 g2 /Hz (fl at)
• 3.13 g RMS, 10 minutes per axis for all 3 axes
Non-Operating:
• 5Hz to 50Hz: 0.5G @ 0.1 Octave/minute
• 50Hz to 500Hz: 3G @ 0.25 Octave/minute
ShockThe board is designed to meet the following requirements IEC 60068-2-27 and MIL-STD-810E, Method 516:
• Operating: 30G/11 ms half sine
• Non-Operating: 50G, 170 inches/second trapezoidal
MTBF>170,000h@40°C, calculations based on Bellcore/Telcordia SR-332
Safety/CertificationCB report to IEC 60950-1, complies with EN/CSA/UL 60950-1
EMCEN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1

CFR 47, FCC Part 15, Subpart B
Telcordia GR-1089-Core-Issue 3 and SR-3580 Issue 2
• EMC Directive 89/336/EEC (Europe)
• EN55022 (Europe)
• EN55024 (Europe)
• EN61000-4-2 + A1 + A2
• EN61000-4-3 + A1
• EN300 386 V1.3.3, Electro Magnetic Compatibility (EMC) Requirements for Public Telecommunication Network Equipment; Electromagnetic Compatibility (EMC) Requirements
Warranty2 Years
RoHSCompliant

Ordering Details

BoardAM4311M 4x SFP Interfaces, single mid-size
AccessoriesN/A