Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron AM4320 - Dual Port 10GbE SFP+ Ethernet AdvancedMC Module

Intel 82599ES Ethernet Controller, Remote Management via IPMI v2.0

Introduction

The Kontron AM4320 Dual 10GbE module is the ideal AdvancedMC unit for network applications that require multiple ports directly from an AdvancedTCA processor blade, such as the AT8060 Dual 8-Core Xeon ATCA Processor blade.

The board features the Intel® 82599ES Ethernet controller and provides two dual 10 Gigabit interfaces via two SFP+ ports.

Specification

Ethernet/WLAN

Interface(s)Front Panel: Two SFP+ connectors
PCI Express GEN 2 x8 interface is connected from the AMC edge connector to 82599ES controller
PCI-Express interface also work in x4, and x1
Controller(s)Ethernet: Intel® 82599ES Ethernet controller
Manageability: IPMI implementation is based on Renesas H8S2472 controller, also called the MMC MMC Firmware supports IPMI 2.0.

IPMI Features
• Management Controller compliant IPMI v2.0
• MMC Firmware is IPMI v2.0, AMC.0 R2.0 compliant
• MMC Firmware implements AMC.1 R2.0 E-keying extensions

General

ExpansionAMC.0 specification R2.0; AMC.1 Revision 2.0; IPMI firmware upgrade complies with PICMG HPM.1 R1.0 specification
Supports PCIe hot-plug, when the AMC carrier and operating system are properly instrumented
ElectricalModule power consumption is no more than 12 Watts
SoftwareRed Hat Enterprise Linux Server version 5.x 64-bit; Red Hat Enterprise Linux Server 6.x 64-bit; Wind River CGL 4.0
TemperatureOperating: 0 to +45°C
Non-operating: -40 to +85°C
HumidityOperating: 5%-93% non-condensing @40°C
Non-operating: 5%-93% non-condensing @40°C
AltitudeOperating: -300 m to 4,000 m / -984ft to 13,123 ft
Non-operating: -300 m to 14,000 m / -9,84 ft to 45,931 ft
VibrationOperating:
• 5 Hz to 10 Hz @ +12 dB/oct (slope up)
• 10 Hz to 50 Hz @ 0.02 m2/s3 (0.0002 g2/ Hz) (fl at)
• 50 Hz to 100 Hz @ -12 dB/oct (slope down)
Non-operating: 5 to 200 Hz 0.2 g
ShockOperating: 11 ms half sine, 3 g, 3 shocks in each direction
Non-operating: 6 ms half sine, 18 g, 100 shocks in each direction
MTBFTargeted MTBF is 250000 @ 30°C, calculations based on Telcordia SR-332
Safety/CertificationEN 300 019; Telcordia GR-63; • Telcordia SR-3580 level 3; Telcordia GR-1089; EN 300 386; EN 55022; EN 55024; UL/CSA/IEC/EN 60950-1
Warranty2 Years
RoHSCompliant

Ordering Details

BoardOn request
AccessoriesN/A