Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Fujitsu

Fujitsu mini-ITX Chassis

Suitable for Fujitsu D2963-S Industrial Mainboard

Industrial chassis for both horizontal and vertical mode

 
Fujitsu industrial mini-ITX chassis
  
  • Mounting option for 2.5” HDD
  • HDD/system fan (4 pin PWM)
  • HDD SATA and power cable
  • Chassis stand (horizontal/vertical, removable)
  • Chassis intrusion support
  • Mechanical lock for power input connector
  • Mounting option for internal USBWLAN module
  • Mounting option for PCI riser (low profile)
  • Mounting option for 2nd serial port
  • Kensington lock support



Datasheet/Manual:

Fujitsu Industrial Chassis datasheet in PDF format Datasheet in PDF format

 

Introduction

This new mini-ITX enclosure from Fujitsu has been designed for use with their new D2963-S industrial mainboard. When used with the passively cooled D2963-S1 (AMD Sempron 200U, single core 1GHz) version, fanless operation up to +35°C ambient is allowed. When used with the active cooled D2963-S2 (AMD Athlon Neo X2 L325, dual core 1.5GHz) board, operation up to +50°C ambient temperature is allowed. The enclosure is CE approved. Internally, there is room for a single 2.5" HDD/SSD and there is a single PCI expansion slot (via optional PCI riser card).

Internal View

Fujitsu mini-ITX enclosure internal view

 
 
 

Specification

Chassis:

Size 250 x 52 x 191 mm (w x h x d)
Colour anthracite
Weight ~ 1kg

Operating conditions:

Temperature range:
D2963-S1, fanless, horizontal or vertical mode 0°C – 35°C)
D2963-S2, CPU fan + HDD fan, horizontal mode 0°C – 45°C)
D2963-S2, CPU fan + HDD fan, vertical mode 0°C – 50°C)
Note: All temperatures refer to the ambient temperature of the housing
Humidity:
10% - 90% relative humidity (non-condensing)

HDD fan specification:

PWM (4 pin), 40 x 40 x 10mm
1750 – 5.500 rpm (nominal)
Two ball bearing
Note: Fan not required for D2963-S1 (TAmbient ≤ +35°C)

Package contents:

Chassis bottom/top incl. front bezel; I/O with integrated EMI gasket
HDD carrier incl. 4 pin PWM fan
Riser card holder incl. power button / power LED and intrusion switch
HDD SATA cable and power cable (length = 250 mm each)
Cover clip for second serial port
Chassis stand
-Plastic lock for system power cable
Mylar (adhesive polyester) for optional WLAN module insulation

Optional Accessories:

VESA mounting kit
USBWLAN module incl. cover
2nd serial port cable
PCI riser card
19V AC adapter with EU or UK power cord

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

C26361-K528-A300-Z100 Fujitsu mini-ITX enclosure

Chassis can be supplied with D2963-S, HDD with operating system if required - contact us for details.

Board comes with driver CD and ATX back panel (but no cables)

Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.