Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Connect Tech COM Express® Type 7 Carrier Board

Dual 10GbE Ethernet, M.2 NVMe, Mini PCIe Expansion Slots and more

Introduction

Connect Tech’s COM Express® Type 7 Carrier Board is based on the PICMG COM Express® COM.0 R3.0 specification. It includes 2x 10G ethernet from SFP+ modules, 2x GbE ports, M.2 NVMe Storage, 4x USB 3.0, full and half size Mini PCIe expansion slots, 8x 3.3V buffered GPIO, and a Console connection via Micro USB.

The carrier board is ideal for high-compute, enterprise level applications that have a need for a small form factor rugged solution providing access to high-end Xeon D class processors.

Specification

CPU

CPU SpecAll COM® Express Type 7 Module (PICMG COM Express® COM.0 R3.0)
Support for current and next-gen Xeon-D (Broadwell DE) processor modules
GraphicsNone - Headless System (possible through Mini PCIe expansion)
Initial Setup/Debug can be achieved via MiniPCIe graphics module
Network2 x 10GbE (via SFP+ cages)
2x Gigabit Ethernet (10/100/1000) RJ-45s
Storage1 x M.2 2280 M-Key Slot (Dual function PCIe + SATA)
– NVMe (PCIe x4 Gen3) Capable
– SATA III (6Gbps) Capable
1 x Standard SATA Port (7-Pin)
USB4x USB 3.0
Serial1x CPU Console UART (via Micro USB)
1x General Purpose UART (via 2mm header)
AudioNot directly supported, possible through Mini PCIe expansion
Other8x 3.3V buffered GPIO
Power Button, Reset Button, Sys Ctr
OptionsOptional Cable Kit: Includes Serial, SATA, VGA Video, LVDS, GPIO DB9 cable

General

Expansion1x mini PCIe slot full size (USB + PCIe)
1x mini PCIe slot half size (USB + PCIe)
Electrical+12V Input
Consumption depends on COM® Express module, features installed
Mechanical125mm x 95mm
Conformal CoatingUpon request
SoftwareN/A (depends on module)
TemperatureOperation (standard): -40 to 85°C
Operation (storage): -40 to 85°C
HumidityOperating: 10% to 90%
Storage: 5% to 95%
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardCCG070 COM Express® Type 7 Carrier Board

Note - no COM Express® modules or heat-spreaders are included - please order separately.

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
AccessoriesCBG116 20-pin Minitek to Flying Leads
CBG247 Micro USB to USB Type-A Male (For Console)
CBG136 RTC Battery Cable (to 2032)

Need storage - try Innodisk SSD