Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron COMe-bP5020 - QorIQ™ Power Architecture® Computer-on-Modules

Freescale™ Power Architecture® COM for Deeply Embedded Number Crunching Systems

Introduction

The Kontron COMe-cP5020 in the COM Express® basic (95 mm x 125 mm) form factor is based on the Freescale QorIQ P5020 dual-core power processor with 2.0 GHz. Featuring 64 bit technology, it integrates up to 8 GByte of soldered DDR3 RAM at 1333 MHz and ECC. Two additional MByte of shared third level cache facilitate core-to-core communications to minimize accesses to main memory. The Kontron COMe-b5020 with its innovative Data Path Acceleration Architecture (DPAA) assures that even heavy network traffic does not affect the processing performance of the cores. With DPAA it offloads the cores from the common packet-handling tasks, which leaves more headroom for the relevant processing even at full load.

The board also features up to 2 GB of NAND Flash as well as a socket for MicroSD cards on the module to offer reliable storage space for application data. In terms of I/Os, this new module interfaces the QorIQ-specific I/Os towards the carrierboard: Besides USB 2.0 ports there are also UART (TxD, RxD, RTC and CTS) und Gigabit Ethernet interfaces. Flexible interface support is guaranteed by 4 (COMe-cP2020) or 18 (COMe-bP5020) SERDES lanes, which can be configured according to application-specific needs in a whole range of different combinations for example as PCIe x4, sRIO x4 or Serial Gigabit Media Independent Interface (SGMII). The Kontron COMe-bP5020 offers in addition XAUI and SATA interfaces. 

Specification

CPU

CPU SpecFreescale™ QorIQ™ P5020 (P5010) e5500 Power Architecture®
2x 2.0 GHz or 2x 1.6 GHz
32 KB L1 instruction cache and 32 KB L1 data cache for each core; 512 KB L2 cache/Core; 2MB L3 cache shared
MemoryUp to 8GB DDR3-1333 MHz ECC
Network1x 10/100/1000 Base-T
Storage64kbit I²C EEPROM / up to 2GB NAND Flash; 2MB NOR Flash
2nd 2MB SPI NOR Flash for boot recovery purposes
2x SATA multiplexed with SERDES; 512kB MRAM
MicroSD card slot / bootable
Expansion18x SERDES lanes configurable; pre-selected standard configurations:
2x PCIe x4 + 4x 1 GbE SGMII + 1x SATA
2x PCIe x4 + 4x 1 GbE SGMII + 1x XAUI
2x PCIe x4 + 1x XAUI + 1x SATA
2x sRIO x4 + 4x 1 GbE SGMII + 1x SATA
USB5x USB 2.0 (one channel device capable)
Serial2x UART (2x FourWire/ 2x TX/RX)
Other12x GPIO
1x I²C
1x IEEE 1588 control
1x SDHC; 2x MDIO (iEEE 802.3 clause 22 + clause 45) 5x IRQ Interrupts; Processor Local Bus
Watchdog, JTAG debug, Aurora debug; Temperatur Monitor; LEDs
Bootloader: U-Boot

General

Electrical12 V +/- 5% (optional RTC supply voltage of 3.3V)
Est. 30W/12V
Mechanical95 x 125 mm
CAD drawings on request
Conformal CoatingUpon request, MOQ applies
SoftwareLinux; Wind River VxWorks 6.9.2
TemperatureOperation (standard): 0° to 60°C
Storage: (standard): -30° to 85°C
HumidityOperation: 10% to 90%, storage: 5% to 95% (non condensing)
Warranty2 Years
RoHSCompliant
Availability:Last time buy date: 31 August 2016

Ordering Details

Board68001-4010-15-2
COMe-bP5020 COM Express® basic, Freescale™ QorIQ™ P5020 2x1.5GHz, 4GB DDR3-1333 ECC memory, 1GB NAND Flash

68001-8010-15-2
COMe-bP5020 COM Express® basic, Freescale™ QorIQ™ P5020 2x1.5GHz, 8GB DDR3-1333 ECC memory, 1GB NAND Flash.

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories68100-0000-00-S Starterkit for QorIQ™ based Com Express® COM, incl. COMe Eval Carrier QorIQ™, Adapater cards for SRIO (ADA-Eval-QorIQ-SRIO)/SGMII (ADA-Eval-QorIQ-SGMII)/SFP+XAUI (ADA-Eval-QorIQ-XAUI), Mounting Kit, Power supply, Documentation

68100-0000-00-0 COMe Eval Carrier QorIQ™ - Micro-ATX form factor

1053-8446 Linux BSP for COMe-bP5020 modules
1053-8353 VxWorks 6.9.2 BSP for COMe-bP5020 modules

38110-0072-05-0 COM Express® Connector Baseboard 5mm 2x220 pin 72 pcs
38110-0054-08-0 COM Express® Connector Baseboard 5mm 2x220 pin 54 pcs

Need storage - try Innodisk SSD