Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro CM10 - Rugged COM Express with Sitara ARM Cortex-A15

PICMG COM.0 COM Express Mini form factor

Introduction

The CM10 is a low-power COM Express Mini module built around the TI Sitara ARM Cortex-A15 AM57xx series of processors with or without graphics support.

Low-Power, High-Performance Processor

Processor versions with graphics support (only AM57x8) offer 1080p HD video acceleration, dual 3D graphics and single 2D graphics options for an enhanced user interface.

The processor series features scalable single/dual Cortex- A15 and C66x DSP processors as well as a quad-core PRUand dual Cortex-M4 for real-time, deterministic control.

Wide Range of I/O, Small Space

A wide range of standard I/O is supported by the processor which makes it possible to implement many functions on a very small form factor.

The CM10 is mechanically compliant to the COM Express Mini format. Due to the multitude of I/O offered by the ARM Cortex-A15 processor, however, the pin assignment differs from the standard COM Express type 10.

Rugged for Harsh Environments

The exclusive use of soldered components ensures that the COM withstands shock and vibration. The design is optimised for conformal coating making it ideally suited for rugged environments. A VITA 59 (Rugged COM Express) version is available on request. Due to its low power consumption, the module can be operated without fans and in the extended temperature range of -40°C up to +85°C. The processor’s long-term
availability ensures future-safety for a wide range of applications.

Specification

CPU

CPU SpecChoice of:
• TI Sitara ARM Cortex-A15, AM5716, 500 MHz/1.5 GHz, single core, no ECC
• TI Sitara ARM Cortex-A15, AM5726, 1.5 GHz, dual core, no ECC
• TI Sitara ARM Cortex-A15, AM5718, 1.5 GHz, single core, no ECC, with GPU
• TI Sitara ARM Cortex-A15, AM5738, 1.5 GHz, dual core, ECC, with GPU
ChipsetIntegrated in CPU
MemorySystem Memory:
• Soldered DDR3, ECC support
• 1 GB or 2 GB

Boot Flash
• 4 MB or
• 8 MB or
• 16 MB
GraphicsIntegrated in processor; only with AM5718 or AM5738
Maximum resolution: 1920 × 1080 pixels
60 fps frame frequency
2D and 3D graphics
Display controller with DMA engine and up to three pipelines
HDMI encoder: HDMI 1.4a and DVI 1.0
NetworkTwo channels, 1000BASE-T
Four channels, 100BASE-T
Two link and activity LEDs per channel
StorageeMMC device onboard , soldered; different sizes available (factory option)
One channel, SATA Revision 2.x (via COMe connector)
SD card (via COMe connector)
USBOne host channel, USB 2.0
One host channel, USB 3.0 (configurable; instead of one PCI Express x1)
SerialSeven interfaces
Physical interfaces RS232 or RS422/RS485 depending on implementation on carrier board
AudioOne Multichannel Audio Serial Port
OtherTwo CAN bus channels, 2.0B CAN protocol
One I2C interface
One SPI interface
Two GPIO lines
CommonWatchdog timer
Temperature measurement
Real-time clock with supercapacitor or battery backup
BIOSU-Boot Universal Boot Loader

General

ExpansionOne x1 link, PCIe 2.x or
Two x1 links, PCIe 2.x (configurable; second link instead of USB 3.0) or
One x2 link, PCIe 2.x (configurable; second link instead of USB 3.0)

PICMG COM.0 COM Express Module Base Specification
• COM Express Mini, Module Pin-out not compatible
VITA 59 RCE: Rugged COM Express (in process) available on request
• With conduction cooling cover and frame
• Rugged COM Express Mini, Module Pin-out not compatible
Electrical+12 V (+4.75 V to +12.60 V)
Mechanical55 mm x 84 mm (models conforming to PICMG COM.0 COM Express Mini format)
Conformal CoatingUpon request, MOQ applies
SoftwareLinux
TemperatureTemperature range (operation): -40 to +85°C (screened), compliant with EN 50155, class TX (model 15CM10-00)
Temperature range (storage): -40 to +85°C

Cooling Concept
• Conduction-cooled versions according to VITA 59 RCE: Rugged COM Express in process
• Air-cooled versions according to PICMG COM.0 COM Express standard
HumidityRelative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Weighttbd
Altitude-300 m to +3000 m
VibrationEN 50125-3, class: 3 m from track
ShockEN 50125-3, class: 3 m from track
Safety/CertificationUL 94V-0
EMCEMC behavior depends on the system and housing surrounding the COM Express module. The Rugged COM Express module in its cover and frame supports the system to meet the requirements of:
• EN 50155
• EN 60068-2-30
• EN 55022
• EN 50121-3-2
Warranty2 Years
RoHSCompliant

Ordering Details

Board15CM10-00
COM Express "Mini",TI Sitara ARM Cortex-A15 AM5718, 1.5GHz, 1GB RAM, 2 PCIe x1, 1 Gb ETH (phy), 1 Gb ETH (RGMII), 4 Fast ETH (MII), 1 SATA, 1 SD card, 1 USB 2.0, 2 CAN 2.0B, 8 UART, 1 I2C, 1 DVI, 1 SPI, 1 McASP (Audio Out), -40°C..85°C (screened)
AccessoriesN/A
Order Online MEN Mikro CM10 - Order Online

Need storage - try Innodisk SSD