Diamond Point International
 
Insys Microelectronics

INSYS Microelectronics i-module modem

Low-power 14.4/33.6/56k modem solution

Serial Interface, Ideal For Embedded Products

 
INSYS Microelectronics i-module modem
 
  • 14.4/33.6/56kbaud modem
  • Just 56mm x 56mm square
  • Operating temp 0 ° to +55°C
  • 2 alarm inputs (pro version)
  • 2 control outputs (pro version)
  • Sized for portable devices
  • Security functions
  • 200mA @ 5V power
  • Evaluation board available



Datasheet/Manual:

Insys i-modul datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The i-module modems 144/336/56k are used for the analogue telephone network (PSTN). Dial-up and based line modems are available.

i-module modems have in common:

  • Complete communication module for integration on pin boards
  • Uniform small size of 56x56 mm
  • Uniform hardware interface (RS 232/5V)
  • Uniform software interface(extended AT commands)

Apart from data transfer, additional features are available:

  • Alert via 2 separate inputs (SMS or data connection)
  • Firmware flash update
  • Output controllable via DTMF
  • i-module modem 56K PRO: internationally utilizable in 97 countries
  • i-module modem 144 Basic, 56K Basic: internationally utilizable in 47 countries
 
 

Specification

Network interface: Analogue telephone network, dial-up line
Optional leased line 2- and 4-wire version
Data transmission rate: 14.400 - 56.000 kbps
Alarm inputs: 2
Control outputs: 2
Watchdog: Yes
Software update: Via flash
Galvanic insulation: To telephone network
Approvals: R&TTE, CTR21
Standards: Developed according to CE directives manufactured according to ISO 9002
Configuration: AT command via serial line, remote configuration
Connection: auto answer mode, hardware/software handshake, autobauding, fixed speed, sleep mode, idle connection control, number storage, SMS to fixed network, international settings3), caller ID presentation3)
Alarm functions:

Triggered by alarm input or AT command:
SMS5 transmission, fax transmission, establish data connection, message transmission over data connection, collective fax message

Control Output: AT command (local and remote), DTMF
Security functions: Password protection for connection, security callback and remote control, caller ID selection3
Data format: 10 and 11 bit: 7E1, 7O1, 7N2, 7E2, 7O2, 8N1, 8E1, 8O1, 8N2 and bit-transparent
Protocols, error correction, compression: V.92), V.90, V.34+, V.34, V.32 bis, V.32, V.23, V.22
V.22 bis, V.21, Bell Norm 103/212
Fax class 1/2
MNP2/3/4, V.42, MNP 10, MNP 10 EC, MNP 5, V42 bis
Power: 5 VDC ±5%
190 mA (144/336 transmission)
140 mA (144/136 standby)
200 mA (56k PRO)
Interface: TTL RS232 (2 mm connector)
300 - 115.000 bps (depending on modul)
Size: 56mm x 56mm x 15mm
Temperature: 0 - 55 °C
Humidity: 0 - 95% (non condensing)
ROHS Status: This product is lead free/ROHS compliant.

Ordering Details:
Board:

11-01-01-01-25.007 i-modul Modem 144 Basic 3.0 normal PSTN connection with 14.400 bps data rate, for international use and digital Ios
11-01-01-01-26.002 i-modul Modem 144 PRO 3.0 normal PSTN connection with 14.400 bps data rate, with alarm and security functions and digital IO's
11-01-01-01-36.001 i-modul Modem 336 PRO 3.0 normal PSTN connection with 33.600 bps data rate, with alarm and security functions and digital IOs

11-01-01-01-31.009 i-modul Modem 336 LL 3.0 2-wire-leased-line with 33.600 bps data rate
11-01-01-01-31.005 i-modul Modem 336 LL 4 D 4-wire-leased-line with 33.600 bps data rate

11-01-01-01-45.013 i-modul Modem 56 K Basic 3.0 normal PSTN connection with 56.000 bps data rate, for international use
11-01-01-01-40.014 i-modul Modem 56 K PRO 3.0 normal PSTN connection with 56.000 bps data rate, for international use, with alarm and security functions and digital Ios

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

11-01-02-03-01.006 i-module evaluation board

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.