Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron CPS3105 - 3U CompactPCI® Serial XMC Board Carrier

1 XMC Slot, -40 to +85°C Screened

Kontron CPS3105 - 3U CompactPCI® Serial XMC Carrier
Key Features
3U 4HP CompactPCI® Serial XMC Carrier
1 XMC slot (PCIe® 2 x8 links)
Hot swap capability and power LED
For cards with internal PCIe® and USB interface PICMG CPCI-S.0 CompactPCI® Serial peripheral
0 to 60°C or -40 to +85°C versions

Introduction

The CPS3105 is a 3U CompactPCI® Serial carrier board that provides support for one XMC module. The carrier board is intended to offer system designers a cost-effective solution to expand the systems I/O capability using a wide range of XMCs available on the market.

The CPS3105 is equipped with a dedicated PCI Express® Switch between the onboard XMC connector and the CPCI-S.0 system connector providing two advantages. First, it decouples and buffers the PCI Express® signals and restores signal integrity. Second, it is able to convert one x4 PCI Express® 3.0 data stream from the system side into one x8 PCI Express® 2.1 data stream to the XMC side. Thus, the maximum data bandwidth can be provided to commonly available XMC modules based on PCI Express® 2.1.

Specification

Adapter/Carrier

FeaturesXMC Slot
• One onboard XMC connector (P15) with one x8 PCI Express 2.1 interface (up to 5 GT/s)
• XMC Specifications ANSI/VITA 42.0 and ANSI/VITA 42.3

PCI Express Switch: PCI Express® Switch from PLX Technology, used to convert one x4 PCI Express 3.0 interface to one x8 PCI Express 2.1 interface
Hot Swap Handle: If the HS handle is pressed, the onboard power supplies will be shut down and the board can be safely removed from the CPCI-S.0 system
LEDs: Pwr (Power): Power Status of the CPS3105

General

ExpansionP1 CPCI-S.0 connector supporting one x4 PCI Express 3.0 interface
CompactPCI® Serial Specifi cation PICMG® CPCI-S.0 R1.0 compliant
ElectricalSupply voltage/power consumption:
• +12V (-10%/+10%), approx. 4.7 W (without XMC module)
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Front panel: 4HP with ejector
Conformal CoatingConformal coating on request
SoftwareXMC drivers as supported
TemperatureTemperature range (operation):
• 0 to 60°C
• -40 to +85°C extended temperature
Temperature range (storage): -40 to +85°C
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weight140 g (without mezzanine card)
MTBF1,072,111 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C
Safety/CertificationCompliant to IEC60950-1, EN60950-1, UL94-V0; designed to meet: UL60950-1, CSA 22.2 No. 60950-1
EMCCompliant to EN55022 Class B, EN55024, EN61000-6-1/ -2/ -3 /-4, EN50121-3-2 (Railway); designed to meet: FCC, VCCI, BSMI
Warranty2 Years
RoHSCompliant

Ordering Details

BoardCPS3105
3U/4HP carrier for one XMC module, 0 to +60°C
AccessoriesN/A