Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN MIkro G227 - PCIe Mini Card Carrier for Wireless Functionality

3 PCI Express Mini Card slots, -40 to +85°C Screened

Introduction

The G227 is a rugged single slot CompactPCI Serial carrier board for up to three PCI Express Mini Cards. It provides connectivity solutions to cellular networks by adding LTE, UMTS, GSM or other types of wireless modems. Each modem slot is equipped with two RP-SMA antenna connectors / cables by default. Other types of antenna connectors are available on request. A third PCI Express Mini Card slot is available for GNSS

A third PCI Express Mini Card slot is available for GNSS (MEN PX1N module), a WLAN module, a virtual SIM card or an audio codec for processing voice data. The third module slot may also include an antenna connector if required.

The G227 is intended for use in various train connectivity applications including onboard WLAN, passenger infotainment and fleet management systems. In the train communication system architecture, the G227 is typically located at the front end where it communicates directly with a cellular network. To optimise the connection and network coverage, the G227 features up to ten micro SIM cards slots.

MEN provides a user-friendly software tool designed for interacting with the G227. The user is able to remotely control which micro SIM cards are connected to the modems. Remote power reset is also possible for each modem and the third optional PCIe Mini Card module. The G227 is designed for -40 to +85°C operating temperature and prepared for conformal coating in order to be used also in harsh and mobile environments.

The final environmental qualification depends on the respective PCIe Mini Cards used with the carrier. Data Sheet

Specification

Adapter/Carrier

FeaturesTwo PCI Express Mini Card slots (only full size)
• USB 3.0 interface
• For UMTS, GSM, HSPA, LTE functionality

One PCI Express Mini Card slot (only full size)
• USB 2.0 interface
• PCI Express interface
• For WLAN, GPS, GLONASS, audio, virtual SIM functionality

10 microSIM card holders
Individual reset and power on/off for each PCI Express Mini Card (via software)
ConnectionsFour Reverse SMA antenna connectors or
Five Reverse SMA antenna connectors (on request)
Four HF cables
One power LED and one user LED for each PCI Express Mini card

General

ExpansionCompliance with CompactPCI® Serial PICMG CPCI-S.0 Specification
Peripheral slot
Host interface:One PCI Express® x1 link
ElectricalSupply voltage/power consumption:
• +12V (-10%/+10%), depending on plugged card
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Front panel: 4HP with ejector
Conformal CoatingConformal coating on request
SoftwareSoftware for controlling microSIM cards and PCI Express Mini Cards
PCIe Mini Card drivers as supported
TemperatureTemperature range (operation):
• -40 to +85°C (screened)
• Airflow: min. 1.5 m/s
Temperature range (storage): -40 to +85°C
HumidityRelative humidity range (operation): EN 60068-2-30, EN 50155
Weight172 g (without cards)
VibrationEN 50155
ShockEN 50155
MTBFTBD
Safety/CertificationElectrical Safety
• EN 62368-1 (former EN 60950-1)
• EN 50155
• EN 50153
Flammability
• UL 94V-0
EMCRadiated Emission: EN 55022 class B, EN 50121-3-2
Immunity: EN 55024, EN 50121-3-2
Warranty2 Years
RoHSCompliant

Ordering Details

Board02G2227-00
PCIe Mini Card Carrier for Wireless Functionality, -40..+85°C screened
AccessoriesN/A