Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro G25A - 3U CompactPCI Serial Intel Xeon D CPU Board

Up to 32GB DDR4 DRAM Soldered, up to 40 to +85°C Operation

MEN Mikro G25A - 3U cPCI Serial Intel Xeon D CPU Card
Key Features
3U CompactPCI® Serial Intel® Xeon Board
Intel Xeon D-1500, up to 16 cores
Up to 32 GB DDR4 DRAM soldered, ECC
PICMG CPCI-S.0 CompactPCI® Serial
microSD™ card slots
Front: 1 USB 3, 1 USB 2, 2x 10GbE, 1x 1GbE
Rear: 28 PCIe lanes, 2 USB, 6 SATA, 4x 1GbE
0 to +40°C or -40 to +70°C operation

Introduction

MEN Mikro's G25A is a 4HP/3U CPCI Serial CPU card with an Intel Xeon D-1500 processor, supporting 10 Gigabit Ethernet, USB 3.0, SATA, PCI Express and Gigabit Ethernet rear I/O interfaces. 

The versions of G25A with 4, 8 and 16 cores provide concentrated computing performance and are at the same time the basis for virtualization applications. The required abstraction of software from hardware is achieved by the CPU’s built-in hardware virtualization support, the organisation of the 32 GB DDR4 RAM and the scalability of the G25A standard models.

For security reasons a Trusted Platform Module (TPM) is available. Safety functions are implemented using ECC for the RAM storage, a board management controller and a watchdog for the operating system.

While the G25A is prepared for conformal coating and can be equipped with a heat sink as well as being embedded into a conductive cooling frame, all components are by default firmly soldered and guarantee shock and vibration resistance. Therefore, the G25A is suited for applications outside of a protected server room as in a train or an aeroplane or of course also for complex applications in industrial environments.

The minimum standard availability of 7 years guaranteed by Intel and the implementation on the state-of-the-art CompactPCI Serial standard provide future-safety for the customer’s projects. 

Specification

CPU

PlatformTrusted platform module (TPM 2.0)
CPU SpecThe following CPU types are available:Intel Xeon D-1539, 8 Cores
• Intel Xeon D-1577, 2.0GHz standard, 2.6GHz turbo, 8 cores, 12 MB cache, 45W TDP
• Intel Pentium D-1519, 2.2GHz standard, 2.6GHz turbo, quad core, 6MB cache, 45W TDP
• 14nm process technology
Intel Virtualization Technology (Intel VT): VT-d and VT-x
Intel Turbo Boost Technology
Intel Hyper-Threading Technology
ChipsetBuilt into CPU
MemorySoldered DDR4, ECC support
8 GB, 16 GB or 32 GB variants
GraphicsNo on-board graphics
NetworkFront:
• Two RJ45 connectors, 10GBASE-T (10 Gbit/s), or two 8-pin M12 connectors, X-coded, 10GBASE-T (10 Gbit/s)
• One RJ45 connector, 1000BASE-T (1 Gbit/s), or one 8-pin M12 connector, X-coded, 1000BASE-T (1 Gbit/s)
• Two link and activity LEDs per Ethernet channel
Rear:
• Four channels, 1000BASE-T (1 Gbit/s)
StoragemicroSD socket onboard
USBFront:
• One Series A connector, USB 3.0 (5 Gbit/s)
• One configuration port implemented as a USB 2.0 (480 Mbit/s) device interface

Rear:
• Two channels, USB 3.0 (5 Gbit/s)
Rear I/OSATA: Six channels, SATA Revision 3.x (6 Gbit/s), RAID level 0/1/5/10 support
USB: Two channels, USB 3.0 (5 Gbit/s)
Ethernet: Four channels, 1000BASE-T (1 Gbit/s)
PCI Express
• Four x1 links (500 MB/s per link), PCIe 2.x (5 Gbit/s per lane)
• Two x4 links (3940 MB/s per link), PCIe 3.x (8 Gbit/s per lane)
• Two x8 links (7880 MB/s per link), PCIe 3.x (8 Gbit/s per lane)
CommonBoard controller
Watchdog timer
Temperature measurement
Real-time clock with supercapacitor or battery backup
BIOSAMI Aptio

General

ExpansionCompliance with CompactPCI Serial PICMG CPCI-S.0 Specification
System or peripheral slot
PCI Express via rear I/O:
• Four x1 links (500 MB/s per link), PCIe 2.x (5 Gbit/s per lane)
• Two x4 links (3940 MB/s per link), PCIe 3.x (8 Gbit/s per lane)
• Two x8 links (7880 MB/s per link), PCIe 3.x (8 Gbit/s per lane)
ElectricalSupply voltages
• +12V (9.5..15.5V), 6 A nominal, 8 A maximum
• +5V (-5%/+5%) standby voltage optional
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Front panel: 4HP or 8HP with ejector
Conformal CoatingConformal coating on request
SoftwareWindows®
Linux
TemperatureTemperature range (operation) :
• Depends on system configuration (CPU, hard disk, heat sink...)
• Maximum: +70°C
• Minimum: -40°C (all processors)
• Airflow: min. 2.5 m/s
Temperature range (storage): -40 to +85°C

Cooling concept
• Air-cooled
• Conduction-cooled in MEN CCA frame
HumidityEN 60068-2-30, EN 50155
Altitude-300 m to +2000 m
VibrationEN 50155 cat 1 class b
ShockEN 50155 cat 1 class b
MTBFtbd h @ 40°C according to IEC/TR 62380 (RDF2000) (model tbd)
Safety/CertificationFlammability
• PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Electrical Safety
• EN 62368-1 (former EN 60950-1)
EMCEN 55022 class B, EN 50121-3-2 (radiated and conducted emission)
EN 55024, EN 50121-3-2 (immunity)
Warranty2 Years
RoHSCompliant

Ordering Details

Board02G025A00
3U CompactPCI® Serial (CPCI-S.0) SBC, 4HP Xeon D-1539, 8 Cores, 0 to +40°C

02G025A01
3U CompactPCI® Serial (CPCI-S.0) SBC, 8HP, Xeon D-1577, 16 Cores, 0 to 60°C

02G025A02
3U CompactPCI® Serial (CPCI-S.0) SBC, 8 HP, Pentium D-1519, 4 cores, -40 to +70°C, conformal coating
Accessories0751-0046 MicroSD card, 2 GB, -40..+85°C
0751-0052 MicroSD card, 4 GB, -40 to +85°C

0701-0058 0701-0058 - Serial Rackmount Enclosure, 9 Slots, 3U Cards Vertical CompactPCI Serial 19" 4U/84 HP rack-mount enclosure for 3U cards (vertical), 9-slot backplane, system slot left, full mesh, 460 W ATX PSU 90..264VAC, 1U fan tray with 2x 12 VDC fans, 0..+45°C

Need storage - try Innodisk SSD