Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro G211 - 3U CompactPCI® Serial Quad Gigabit Ethernet Interface

Four 10/100/1000Base-T Ethernet Channels, -40 to +85°C Screened

MEN Mikro G211 - 3U cPCI Serial Quad Gigabit Ethernet
Key Features
3U 8HP CompactPCI® Serial Quad Gigabit
Four 10/100/1000Base-T Ethernet channels
Alternatively two redundant channel pairs
RJ45 or robust M12 connectors
Special switch protocols
Fully integrated to comply with IEEE802.3u
CMG CPCI-S.0 CompactPCI® Serial peripheral
-40 to +85°C screened

Introduction

MEN Mikro's G211 quad Ethernet interface is a rugged single Eurocard CompactPCI® Serial peripheral board. It can be used in combination with a CompactPCI® Serial or CompactPCI® PlusIO CPU board in a CompactPCI® Serial or hybrid system.

It provides four Gigabit Ethernet interfaces at the front panel which can be accessed either on four RJ45 or four M12 connectors making it especially suited for applications in harsh environments. All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express® link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1Gbit/s, even if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface.

The G211 is screened for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments.

Specification

Ethernet/WLAN

Interface(s)Four 10/100/1000Base-T interfaces

IEEE802.3x support
• Full-duplex flow control
• Half-duplex back pressure collision flow control
• 1 Gbit/s data transfer rate for each interface, even if all four interfaces are used simultaneously

4x2 status LEDs to signal link status and activity
Connection(s)Four standard 8-pin RJ45 or M12 receptacle connectors

General

ExpansionCompliance with CompactPCI® Serial PICMG CPCI-S.0 Specification
Peripheral slot
Host interface: One PCI Express® x4 link
• PCIe® 2.0 support
• Data rate up to 2 GB/s in each direction (5 Gbit/s per lane)
ElectricalIsolation voltage: 1500V between Ethernet links and between Ethernet links and shield or ground
Supply voltage/power consumption:
• +12V (-5%/+5%), 3.5 W typ/ 6 W max.
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Conformal CoatingConformal coating on request
SoftwareWindows®
Linux
TemperatureTemperature range (operation):
• 0 to 60°C or -40..+85°C (screened)
• Airflow: min. 1.0 m/s
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Weight240 g (with heat sink)
Vibration(sinusoidal): 2 g, 10..150Hz
Shock15 g, 11 ms
MTBF324,639h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCTested according to EN 55022 (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst) and EN 61000-4-5 (surge)
Warranty2 Years
RoHSCompliant

Ordering Details

Board02G211-00
4 1000Base-T Ethernet interfaces, 4 RJ45 connectors at front, 0..+60°C

02G211-01
4 1000Base-T Ethernet interfaces, 4 M12 connectors at front, -40..+85°C screened, conformal coating
AccessoriesN/A