Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro GE1 - 3U CompactPCI® Serial Quad Port Industrial PoE+ Gigabit Ethernet Line Card with PoE

4x Gigabit Ethernet on RJ45 connectors (M12 optional), -40 to +85°C Screened

MEN Mikro GE1 - 3U cPC® Serial Quad PoE+ GbE Line Card
Key Features
3U 4HP CompactPCI® Serial Quad Ethernet
10/100 and 1000 MBit/s speeds
4 Gigabit Ethernet (front) on RJ45 (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for front port and board states
EN 50155 class TX compliant (railways)
PICMG CPCI-S.0 CompactPCI® Serial peripheral
-40 to +85°C with screened components

Introduction

MEN Mikro's GE1 is a 3U Gigabit Ethernet line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GE1 can be supplied with four M12 connectors on the front panel (X-coded variants in preparation)

Note: This is a line card, not a peripheral card (i.e. connects to Ethernet interfaces on CompactPCI® Serial backplane, specifically P6) - refer to block diagram for clarification.

Specification

Main Specification

FunctionSupported Protocols:
• IEEE 1588v2 (together with G101)
• IEEE 802.3 Standard
• Power over Ethernet support (IEEE 802.3 Section 2, Type 1 and 2 - classes 0, 1, 2, 3, 4)
• EEE (Energy Efficient Ethernet)

Power over Ethernet functions on all ports
• PSE (Power Sourcing Equipment) function
• Supports supply classes 0 to 4
• Supplies up to four powered devices (up to 60 W total)
Interface(s)Four 10/100/1000BASE-T ports at front panel (Electrical isolation: 1500 Vrms)
One common isolation group when PoE PSE is installed
Optional PoE(+) Power sourcing support
Port configuration: copper, 10/100 and 1000 MBit/s
Connection(s)Front:
• Four RJ45 or M12 connectors, 1000BASE-TX (1 Gbit/s), Power over Ethernet PSE
• Status LEDs: Two LEDs for each port, signal link status, signal link activity
Rear:
• Serial GPIO (SGPIO)
• PoE Control
• Four Ethernet links on P6

General

ExpansionCompliance with CompactPCI® Serial PICMG CPCI-S.0 Specification
Peripheral slot
ElectricalSupply voltages: +12 V (±10%)
Power consumption: 5 W without PoE support, 85 W max. with 60 W PoE
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Front panel: 4HP with ejector
Conformal CoatingOption - see part numbers
SoftwareN/A
TemperatureTemperature range (operation):
• -40 to +85°C (screened)
• Airflow: 1.5 m/s
Temperature range (storage): -40 to +85°C
HumidityRelative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Weight204 g
VibrationVibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
Shock50 m/s², 30 ms
MTBF250.000 h @ 40°C according to IEC/TR 62380 (RDF2000)
Safety/CertificationFlammability
• PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCEN 55022 (radio disturbance)
EN 61000-4-2 (ESD Immunity)
IEC 61000-4-4 (burst)
Warranty2 Years
RoHSCompliant

Ordering Details

Board02GE01-00
3U CompactPCI Serial, 4 x RJ45 passive Ethernet port extender, no PoE, -40 to +85°C

02GE01-01
3U CompactPCI Serial, 4 x RJ45 passive Ethernet port extender, PoE+, -40 to +85°C

02GE01-02
3U CompactPCI Serial, 4 x M12 passive Ethernet port extender, no PoE, -40 to +85°C, conformal coated

02GE01-03
3U CompactPCI Serial, 4 x M12 passive Ethernet port extender with PoE+, -40 to +85°C, conformal coated
AccessoriesN/A