Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Advanet Inc

Advanet A3pci2615

6-channel Pt100 Measurement 3U CompactPCI Board

Five Ethernet Interfaces, Fanless, Upto 2GB ECC Memory

 
Advanet A6pci261 6 channel Pt100 measurement 3U size CompactPCI board
  
  • 6U Analog Input Board
  • 64 single-ended or 32 differential inputs
  • ±10V, 0 to 10V, 0 to 5V, 1 to 5A ranges
  • 12 bit resolution
  • How swappable
  • 2000 & XP Support



Datasheet/Manual:

Advanet A3pci2614 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The A3pci2615 from Advanet is a 3U size CompactPCI 6-channel Pt100 measurement input board.

A3pci2615 front view

Features:

  1. 6-channel platinum resistance thermometer (Pt100) measurement is possible. As soon as the power is turned on and/or as soon as the hardware is reset, default settings start temperature measurement.
  2. Because a terminal block type two-piece connector is used, it is possible to remove just the terminal block and change the board without removing each of the thermocouple screw clamps from the terminal block. The terminal block does not prevent the removal of the adjacent board.
  3. Can be set to take the moving average of the last four lots of A/D conversion values and calculate the temperature conversion values. Because it is the moving average, the most recent temperature conversion values, averaged for each sampling, can be obtained.
  4. Disconnection of cables including thermocouples can be detected for each input channel. When disconnection is detected, an interrupt can be issued to the CompactPCI bus.
 
 

Specification
Measurement method:

3 wire system
Connectable resistance thermometer:

Pt100
Temperature input range:

-50°C to +100°C
Temperature conversion values:

16-bit code binary format (minus numbers: two's complement)
-500 to +1000 (value to first decimal place x 10)
Resolution:

0.1°C
Overall accuracy:

±0.75°C *1
Input bandwidth:

Approx. 25Hz (-3dB)
Conversion rate:

Approx. 100Hz for each channel
Sampling rate:

Approx. 100Hz for all channels *2
No. of temperature input points:

6 points
Pt100 sense current:

1mA
Isolation method:

Between Pt100 input and CompactPCI bus system : Photo-coupler isolation
Between Pt100 input channels : No isolation
Disconnection detection:

Yes (independent for each channel)
Connection terminal:

6-point terminal block
Recommended wire size:

1.5mm2 or less
Power requirements:

DC5V ±5%, Typ. 0.62A
Board size:

Single height (3U), Single width (4HP)
Weight:

160g
Environmental specifications :

Operating temperature range: 0 to 50°C
Storage temperature range: -10 to 60°C
Operating humidity range: 10 to 90% RH (non- condensing)
Storage humidity range: 10 to 90% RH (non- condensing)
Operating atmosphere: Minimum dust, must be free of corrosive gases
*1: Accuracy does not include accuracy and temperature characteristics for external components (platinum resistance thermometer, etc.) not included on this board.
*2: Equipped with one A/D converter for all Pt100 input channels.
Board size :

Single height (3U), Single width (4HP)
175g
CompactPCI:

PCI Local Bus Specification Revision 2.3 compliant
PICMG2.0 R3.0 Compact PCI Specification compliant
PICMG2.1 R2.0 Compact PCI Hot Swap Specification compliant
Full HotSwap support
Signaling level : 3.3/5 V(TTL)
Bit width : 32 Bits
Address width : 32 Bits
Clock : 33 MHz
ROHS Status:

This product is not currently lead free/ROHS compliant.


Ordering Details:
Board:

A3pci2615 3U 6-channel Pt100 Measurement CompactPCI Board
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.