Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Aitech TM900 - Transition Module for the Aitech C900 CompactPCI SBCs

Eliminates Need for Harnessing and Complex Cabling With C900 I/O Interfaces

Introduction

Aitech’s TM106 transition module is designed as a supplement to the C106 G4+ PowerPC® VME SBC, and intended for use in commercial air-cooled enclosures. The TM106 eliminates the need for harnessing and complex cabling fixtures when connecting to the C106 or the CM106.

The TM106 is available in both front plug-in unit and rear plug-in unit versions, and both versions come in both double-slot and single-slot configurations.

The front plug-in kit is for use with enclosures that support only front plug-in units, or for use with enclosures that support both front and rear plug-in units where the user requires front-panel access to the I/O connections. The TM106 rear plug-in unit is for use with enclosures that support both front and rear plug-in units where the user requires rear-panel access to the I/O connections.

The TM106 is designed for use with enclosures with a rear module depth of 80 mm, and is fully compliant with the IEEE 1101.11 specification. The TM106 may be adapted for use with enclosures whose rear module depth is greater than 80 mm by adding an extender (not included).

The single-slot configuration provides access to the following C106 I/O channels: two Fast Ethernet ports, two USB ports, two dual redundant MIL-STD-1553B ports (via four twinax connectors), five multi-protocol high-speed serial ports supporting RS-232/422/485, eight single-ended or four differential Discrete I/O channels, and a Mictor connector that routes the PCI interface between the C106 and CM106.

The double-slot configuration provides access to all C106 I/O channels: three Fast Ethernet ports, two USB ports, two dual redundant MIL-STD-1553B ports (via four twinax connectors), 10 multi-protocol highspeed serial ports supporting RS-232/422/485, and eight single-ended or four differential Discrete I/O channels, and a Mictor connector that routes the PCI interface between the C106 and CM106. In addition, the TM106 provides a header for each of the C106's PMC sites, enabling attachment of cables to the PMC I/O.

The TM106 also provides jumpers to enable I/O routing for the C106 shared I/O pins as well as interface type customization for serial I/O interfaces.

Specification

Interface

FeaturesProvides Standard Connection for All C900 G4+ PowerPC® VME SBC I/O Interfaces
80mm Module Depth Fully Compliant with IEEE 1101.11
Supports Both Front Only and Front/Rear Plug-in Units Subracks
Direct Rear Plug-in Unit for Subracks Supporting Rear I/O Plug-in Units
Double Slot Front Transistion Module Providing all C900 I/O Interfaces
Single Slot Front Transition Module Providing Most C900 I/O Interfaces
Complete Two Unit Kit (Rear Backplane Adapter Unit and Front Panel Transition Unit) with Cables for Subracks Supporting Front Plug-in Units Only
High Quality Twisted Pair Flat Cable for Transition Module and Rear I/O Adapter Connection
Includes No Active Components
Configuration Jumpers Available for I/O Routing Configuration

General

ElectricalN/A - no active components
MechanicalBackplane Adapter- per IEEE 1101.11 80mm depth type.
Single-slot Transition Module – per IEEE 1101.1 Single slot front panel.
Double-slot Transition Module – per IEEE 1101.1 Double slot front panel.
Conformal CoatingConformal coating on request
TemperatureSeries-100 Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Series-200 Rugged
• Temperature range (operation): -40 to +71C
• Temperature range (storage): -50 to +100C

Series-400 Military
• Temperature range (operation): -55 to +85C
• Temperature range (storage): -62 to +125C

Ruggedization level is determined in the part numbering scheme - refer to datasheet for further details
HumiditySeries-100 Commercial: 0-90%
Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
AltitudeSeries-100 Commercial: 15,000ft
Series-200 Rugged, Series-400 Military: 70,000ft
VibrationSeries-100 Commercial
• Random (g2/Hz): 20-2000Hz/0.02 g2/Hz
• Sine (g PEAK): 10-100Hz/2g

Series-200 Rugged
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 10-100Hz/2g

Series-400 Military
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 50-500Hz/5.5g
ShockSeries-100 Commercial: 20g/6mS
Series-200 Rugged: Conduction-cooled: 40g/11ms, 100g/6ms
Series-200 Rugged: Air-Cooled: 30g/11ms, 75g/6ms
Series-400 Military: Conduction-cooled: 40g/11ms, 100g/6ms
Series-400 Military: Air-Cooled: 30g/11ms, 75g/6mS
Warranty1 Year
RoHSCompliant

Ordering Details

BoardRefer to datasheet for ordering part number scheme
AccessoriesN/A