Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron CPMC1-RC-000 - 3U CompactPCI® PMC Conduction-Cooled Carrier

1 32-Bit/33-MHz PMC Slot, full -40 to +85°C Operation

Introduction

The CPMC1 is a conduction-cooled standard 3U Compact PCI carrier that provides rear I/O for a single width PMC module.

All the 64 rear I/O of the PMC P4 connector are routed to the cPCI J2 backplane connector.

Specification

Adapter/Carrier

FeaturesOne PMC slot
• 32-bit/33 MHz PCI bus
• PCI I/O Signaling Voltage Standard: 3.3V (5.0V on request)
• I/O Access P14 I/O via P2/J2

Characteristics
• DEC Bridge 21150
• Hardware-controlled power ramp up
• Local reset generation
• Signal precharge

General

ExpansionPCI Interface: PCI 2.2 compliant interface, 33 MHz, 32 bits
Electrical10 mA typical @ VI/O DC
Additional power is required by the PMC module
Mechanical100mm x 160mm (3U/4HP card size)
Conformal CoatingStandard
SoftwareN/A - transparent to operating system
TemperatureTemperature range (operation): -40 to 85°C
Temperature range (storage): -45 to 100°C
Humidity5 - 95% (non condensing)
Weight205 g
MTBF2,872,835 hours (Ground Benign, 25C - see manual for further figures)
Warranty2 Years
RoHSCompliant

Ordering Details

BoardCPMC1-RC-000 3U cPCI Conduction-Cooled Carrier Board, -40C to +85C
AccessoriesN/A