Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Performance Technologies

Performance Technologies CPC5564

64-Bit Opteron™ Single/Dual Core Single Board Computer

Onboard Eight-Port Gigabit Switch, PMC Expansion Port, Eight Lane PCI Express
 
Performance Technologies CPC5564
  
  • 64-Bit Single- or Dual-Core Processor Support
  • Single-Slot High-Density Compute Blade
  • High-Performance Solution for PICMG® 2.16
  • Up to 8GB PC3200 DDR SDRAM with ECC
  • Onboard Eight-Port Gigabit Switch
  • PMC Expansion Port
  • CompactPCI® Hot-Swap and IPMI BMC Controllers
  • Supports Both 32- and 64-Bit Operating Systems
  • Full Compliance with PICMG 2.16 and 2.9



Datasheet/Manual:

Performance Technologies CPC5564 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The CPC5564 is the first 64-bit single-slot CompactPCI® single board computer designed for high-performance embedded applications and features the AMD Opteron™ 940 single core processor at 1.8 GHz or 2.2 GHz, or dual core 1.8 GHz processor.

The AMD Opteron processor provides a highly scalable x86 architecture that delivers next generation performance and a flexible upgrade path from 32- to 64-bit computing. Its multi-core architecture offers advanced processing speed while addressing the power and heat constraints of a CompactPCI form factor. Designed to run Linux®, Solaris™ and Windows® applications, the CPC5564 is the ideal processor for high-end packet processing or multi-threaded software applications found in IMS, wireless, softswitch, defense or any other compute-intensive application. Memory is directly accessed by the CPU without passing through a separate North Bridge, dramatically improving performance.

Paired with the CPC5910 storage expansion module, the CPC5564 can support full RAID arrays, disk hot-swap and over 800GB of high-performance SATA storage, making it an ideal embedded database server.
 
 

Specification
General:
  • Compatible with existing 32-bit code base
    • Including support for SSE, SSE2, SSE3, MMX™, 3DNow!™ technology and legacy x86 instructions
    • Runs existing operating systems and drivers
    • Local APIC on-chip
  • AMD64 technology
    • AMD64 technology instruction set extensions
    • 64-bit integer registers, 48-bit virtual addresses, 40-bit physical addresses
    • Eight new 64-bit integer registers (16 total)
    • Eight new 128-bit SSE/SSE2/SSE3 registers (16 total)
  • Multi-core architecture
    • Single core or dual core options
    • Discrete L1 and L2 cache structures for each core
  • Integrated memory controller
    • Low-latency, high-bandwidth
    • 128-bit DDR SDRAM PC3200 at 200MHz
    • Supports two registered DIMMs for a total of up to 8GB
    • ECC checking with double-bit detect and single-bit correct
  • HyperTransport™ technology to I/O devices
    • Three links, 16-bits in each direction, each supports up to 2000 MT/s or 4.0 GB/s in each direction
  • 64KB two-way associative ECC-protected L1 data cache
    • Two 64-bit operations per cycle, three-cycle latency
  • Onboard managed switch
  • 1GB routed to:
    • Host CPU - two channels
    • PMC slot - two channels
    • PICMG 2.16 backplane - two channels
    • Front panel - one channel
  • PMC slot
  • Support for 3 SATA drives and 1 IDE drive
  • Three USB 2.0 ports
    • One front and two rear
  • Onboard video
    • Front/rear
  • Serial port
    • Front/rear
  • User LEDS
  • 64KB two-way associative parity-protected L1 instruction cache
    • With advanced branch prediction
  • 1024KB (1MB) 16-way associative ECC protected L2 cache
    • Exclusive cache architecture-storage in addition to L1 caches
  • Machine check architecture
    • Includes hardware scrubbing of major ECC protected arrays
  • Power management
    • Multiple low-power states
    • System management mode (SMM)
    • ACPI compliant
  • Single slot
ROHS Status:

To be confirmed


Ordering Details:
Board:

CPC5564-B1P1M1H0 Single Core 2.2GHz 64 bit, 2GB, no HDD, XMC
CPC5564-B1P1M2H0 Single Core 2.2GHz 64 bit, 4GB, no HDD, XMC
CPC5564-B2P1M1H1 Single Core 2.2GHz 64 bit, 2GB, 40GB HDD, no XMC
CPC5564-B2P1M2H1 Single Core 2.2GHz 64 bit, 4GB, 40GB HDD, no XMC
CPC5564-B1P2M1H0 Dual Core 1.8GHz 64 bit, 2GB, no HDD, XMC
CPC5564-B1P2M2H0 Dual Core 1.8GHz 64 bit, 4GB, no HDD, XMC
CPC5564-B2P2M1H1 Dual Core 1.8GHz 64 bit, 2GB, 40GB HDD, no XMC
CPC5564-B2P2M2H1 Dual Core 1.8GHz 64 bit, 4GB, 40GB HDD, no XMC
CPC5564-B1P3M1H0 Single Core, Low Power 1.8GHz 64 bit, 2GB, no HDD, PMC
CPC5564-B1P3M2H0 Single Core, Low Power 1.8GHz 64 bit, 4GB, no HDD, PMC
CPC5564-B2P3M1H1 Single Core, Low Power 1.8GHz 64 bit, 2GB, 40GB HDD, no PMC
CPC5564-B2P3M2H1 Single Core, Low Power 1.8GHz 64 bit, 4GB, 40GB HDD, no PMC

Accessories:

CPC5910-12157 SATA Storage Expansion Module with two hot-swappable SATA drives. Requires RTM4810 rear transition module with SATA chain cable
PT-RTM4810-12152 Rear Transition Module w/ no disk drive
PT-RTM4810-12153 Rear Transition Module with one 40GB SATA drive
PT-RTM4810-12154 Rear Transition Module with one 40GB IDE drive
PT-ACC4810-12161 0.5 Meter SATA Cable - for linking to other RTM4810 in the same chassis

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.