Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron CP3002 - 3U CompactPCI® Intel® Core™/Celeron® CPU Board

Up to 8 GB DDR3 ECC SDRAM, up to -40 to +85°C Operation

Introduction

The CP3002 is a highly integrated 3U CompactPCI CPU board based on the Intel® Core™ i7 and Celeron® processor platform combined with the Mobile Intel® QM57 Express Platform Controller Hub.

The CP3002 supports the Intel® Core™ i7-610E and Core™ i7-620LE processors with frequencies up to 2.53 GHz for high-performance needs, as well as the ULV processors Core™ i7-660UE and Celeron® U3405 for temperature- and TDP-critical applications. The integrated next generation graphics core offers superior 3D and video performance resulting in a up to doubled graphics performance compared to previous platform designs. Memory demanding applications can make use of up to 8 GB DDR3 SDRAM with Error Checking and Correcting (ECC). For onboard data storage the CP3002 offers up to 16 GB (32 GB) on a dedicated SATA Flash module or a CFast option via the 8HP extension module.

Specification

CPU

CPU SpecIntel® Core™ i7 and Celeron® processors (32nm technology):
• Core i7-620LE: 2.0 GHz, LV, 4MB L3 cache (shared instruction/data cache between both cores)
• Core i7-610E: 2.53 GHz, SV, 4MB L3 cache (shared instruction/data cache between both cores)
• Core i7-660UE: 1.33 GHz, ULV, 4MB L3 cache (shared instruction/data cache between both cores)
• Celeron® U3405: 1.07 GHz, ULV, 2MB L3 cache (shared instruction/data cache between both cores)
ChipsetMobile Intel® QM57 Express Chipset
MemoryUp to 8 GB dual channel DDR3 SDRAM running at 1066 MHz, with ECC, via two SODIMM sockets
GraphicsHigh performance 3D graphics controller integrated in the processor:
• Support for two independent displays
• Supports digital display resolutions up to 2560 x 1600 pixels @ 60Hz
• Supports analog display resolutions up to 2048 x 1536 pixels @ 75Hz
• Dynamic Video Memory Technology (DVMT), up to 352 MB
Network2x GbE, front or rear (switchable), Intel 82574L Ethernet controller, WOL (Wake-On-LAN) support
StorageHDD: Onboard 2.5" SATA SSD/HDD installation via 8HP extension
CFast: Onboard CFast installation via 8HP extension
SATA: 1x onboard standard SATA connector
SATA NAND Flash:
• Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module
• The SATA NAND Flash option is only available on a 4HP CP3002
SerialXR16L2750IM-F, dual UART, 16C550-compatible
Front I/OFront Interfaces 4HP:
• VGA: 1x VGA-CRT 15-pin D-Sub connector
• USB: 2x USB 2.0 ports, 4-pin standard USB connectors
• Ethernet: 2x RJ45 with integrated LEDs (ACT, SPEED)
• LED´s: 6x LED’s: 4x POST Code or General Purpose, WD, TH

Front Interfaces 8HP (additional to 4HP):
• DVI: 1x 29-pin DVI-D connector
• USB: 2x USB 2.0 ports, 4-pin standard USB connectors
• COM: 1x 9-pin D-Sub connector, RS-232 signalling
• Control: Reset button and HDD LED
Rear I/ORear I/O, via J2, the CP3002 supports:
• Two SATA II ports
• Two Gigabit Ethernet ports without LED signals
• Two USB 2.0 ports
• One VGA analog port
• Two COM ports (LVTTL signal level)
• Five GPIs and Three GPOs (LVTTL signal level)
• Power management signals
OtherWatchdog: FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, Reset, dual-stage
RTC: Integrated in QM57 with 256 Byte CMOS RAM
Trusted Platform Module (TPM): Infineon SLB9635TT TPM 1.2 controller, optional

Onboard Interfaces:
Serial ATA: 1x onboard standard SATA connector
High-Speed I/O Connector: The high-speed I/O connector to the extension module holds the following signals:
• PCI Express
• Two SATA II
• Two USB 2.0
• One DisplayPort
• One COM port RS-232
• HDA
• LPC

I/O Extension Connector: 18-pin I/O extension connector holding 1x SATA port for the SATA NAND Flash module
BIOS2x redundant 8 MB SPI Flashes, with fail-over functionality

General

ExpansionPICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz, version with rear I/O via J2
Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines
Operating in system slot as system master and in peripheral slot in PCI passive mode
CompactPCI Core Specification PICMG 2.0 Rev. 3.0
CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0
ElectricalCore i7-620LE 2.0 GHz and 4GB memory typ. 28W
Mechanical100 x 160mm, 3U, 4HP or 8HP
Conformal Coatingon request
SoftwareSupport for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003, Windows® Server 2008, Linux®, Wind River Linux, VxWorks®, QNX®
TemperatureTemperature range (operation): 0 to +60°C
Temperature range (storage): -40 to +85°C
Extended temperature on project request
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
WeightCP3002 4HP: 340 g
CP3002 8HP: 480 g
MTBFCP3002: 250,129 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°
CP3002-HDD: 1,901,991 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°
Safety/CertificationUL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1
EMCEN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2
Warranty2 Years
RoHSCompliant
Availability:Last time buy date: 15 December 2015

Ordering Details

BoardCP3002-SA-2.0D-4-8F
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O

CP3002-SA-2.0D-4-8F-C
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating

CP3002-SA-2.0D-4-8F-S8
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with SATA Flash 8GB

CP3002-SA-2.0D-4-8R
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O

CP3002-SA-2.0D-4-8R-EX
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range

CP3002-SA-2.0D-4-8R-EX-C
Core i7-620LE, 2.0 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range,
with conformal coating

CP3002-SA-2.0D-8-4F
Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Front I/O

CP3002-SA-2.0D-8-8R
Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O

CP3002-SA-2.0D-8-8R-EX-C
Core i7-620LE, 2.0 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O, extended temp. range, with conformal coating

CP3002-SA-2.53D-4-4F
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O

CP3002-SA-2.53D-4-4F-S16
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Front I/O, with SATA Flash 16GB

CP3002-SA-2.53D-4-8F
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O

CP3002-SA-2.53D-4-4R
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O

CP3002-SA-2.53D-4-4R-S16
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 16GB

CP3002-SA-2.53D-4-8R
Core i7-610E, 2.53 GHz, 4MB L3, 4GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O

CP3002-SA-2.53D-8-8F
Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP, Front I/O

CP3002-SA-2.53D-8-8F-C
Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with conformal coating

CP3002-SA-2.53D-8-8F-HK Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Front I/O, with HDD King Size

CP3002-SA-2.53D-8-4R-S8
Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 4HP, Rear I/O, with SATA Flash 8GB

CP3002-SA-2.53D-8-8R
Core i7-610E, 2.53 GHz, 4MB L3, 8GB DDR3 with ECC, 8HP with CP3002-HDD, Rear I/O
AccessoriesCP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors)
CP-RIO3-04 8HP rear I/O module (additional to 4HP COM1/2)
CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors)

Need storage - try Innodisk SSD