Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron CP3010-SA - 3U CompactPCI® Intel® Core™ 3rd Gen CPU Board

Up to 16 GB DDR3 ECC SDRAM, up to -40 to +85°C Operation

Introduction

The CP3003-SA is a highly integrated, high performance 3U CompactPCI CPU based on the 3rd Generation Intel® Core™ processor technology. The CP3003-SA is available with dual- and quad-core CPU performance scalable from the ULV 1.7 GHz Intel® Core™ i7-3517UE up to the 2.1 GHz i7-3612QE processor. The new Intel® HD4000 graphics with integrated DirectX® 11, OpenGL 3.1 and OpenCL 1.1 support provides an up to four times better graphics performance compared to previous platform designs. Additionally, now three independent graphics outputs are supported.

Memory-demanding applications can make use of up to 16GB 1600MHz DDR3 SDRAM with Error Checking and Correction (ECC). For onboard data storage the CP3003-SA offers up to 32GB on a dedicated SLC SATA Flash module or a HDD/SSD and CFast option on the 8HP extension module.

Specification

CPU

CPU Spec3rd Generation Intel® Core™ i7 processor (22nm technology):
• i7-3612QE: Quad-Core 2.1 GHz, SV, 6MB L3 cache (shared instruction/data cache, shared among all cores)
• i7-3555LE: Dual-Core 2.5 GHz, LV, 4MB L3 cache (shared instruction/data cache, shared among all cores)
• i7-3517UE: Dual-Core 1.7 GHz, ULV, 4MB L3 cache (shared instruction/data cache, shared among all cores)
• Celeron® processor is offered on project request
All boards are passive cooled with a heatsink in 4HP height
Forced air cooling at specific flow rate is required depending on the processor version
ChipsetMobile Intel® QM77 Platform Controller Hub
MemoryUp to 16GB dual channel DDR3 SDRAM running at 1600 MHz, with ECC, via two SODIMM sockets
GraphicsIntegrated Intel® GMA HD 4000 iGFX, Triple Independent Display, Support for BluRay 2.0, AVC/H.264, VC1, WMV9, OpenGL 4.0, DirectX® 11, OpenCL 1.1
• Support for up to 3x independent graphics outputs
• Supports analog display resolutions up to 2048 x 1536 pixels @ 75 Hz
• Supports digital display resolutions up to 2560 x 1600 pixels @ 60 Hz
• Dynamic Video Memory Technology (DVMT)
NetworkUp to three 1000BASE-T interfaces, two front/rear switchable with WOL (Wake-on-LAN) support, third available via extension CP3003-HDD, Intel 82574L Ethernet controller
StorageOnboard: Up to 32GB SLC NAND Flash on a dedicated SATA NAND Flash module (option is only available on a 4HP CP3003-SA)
HDD: Onboard 2.5" SATA SSD/HDD installation via CP3003-HDD extension, optionally available with two SSD/HDD
CFast: Onboard CFast installation via 8HP extension
SerialXR16L2750IM-F, dual UART, 16C550-compatible
Front I/OFront Interfaces 4HP
VGA: 1x VGA-CRT 15-pin D-Sub connector
USB: 2x USB 2.0 ports, 4-pin standard USB connectors
Ethernet: 2x RJ-45 with integrated LEDs (ACT, SPEED)
LED´s: 6x LEDs: 4x POST Code or General Purpose, WD, TH
Rear I/OThe CP3003-SA supports:
• 2x SATA 3Gb/s ports
• 2x Gigabit Ethernet ports without LED signals
• 2x USB 2.0 ports
• 1x VGA analog port
• 2x COM port RS-232 (LVTTL signal level)
• 5x GPIs and 3x GPOs (LVTTL signal level)
• Reset and Power Management signals
• Option to write protect non-volatile RAMs via a special pin
OtherWatchdog: FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage confi guration
RTC: Integrated in PCH, with 256 Byte CMOS RAM
Trusted Platform Module (TPM): Atmel AT97SC3204 TPM 1.2 controller

Onboard Interfaces:
SATA Cable Connector 1x onboard standard 7-pin SATA connector with locking mechanism, SATA 6Gb/s
High-Speed Extension Connectors 2x high-speed connectors holding:
• PCI Express
• One SATA 3Gb/s
• One SATA 6Gb/s
• 2x USB 2.0/3.0
• 2x DisplayPort
• COM1 (TTL)
• HDA
• LPC
SATA Extension Connector 1x 18-pin connector holding one SATA port for the SATA NAND Flash module
BIOSAMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board configuration via Shell, diskless, keyboardless, videoless operation

General

ExpansionPICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz (66MHz on request), version with rear I/O via J2
Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines
Operating in system slot as system master and in peripheral slot in PCI passive mode
CompactPCI Core Specification PICMG 2.0 Rev. 3.0
CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0
ElectricalSupply voltage/power consumption:
• +5.0V (4.85 V min. to 5.25 V max)
• +3.3V (3.2 V min. to 3.47 V max)
• +5.0V STDBY (optional, 4.85 V min. to 5.25 V max)
• CP3003-SA with i7-3555LE DC 2.5 GHz typ. 21W
• CP3003-SA with i7-3612QE QC 2.1 GHz typ. 29W
Mechanical3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm
Conformal Coatingon request
SoftwareSupport for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003/2008, Linux, VxWorks®, QNX®
TemperatureTemperature range (operation):
• 0 to +60°C standard
• -40 to +85°C extended temperature E2
Temperature range (storage): -40 to +85°C
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
WeightCP3003-SA 4HP: 320 g
MTBF274,266 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C
Safety/CertificationUL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1
EMCEN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2
Warranty2 Years
RoHSCompliant

Ordering Details

UpdateNovember 2015 - Kontron have notified that they have five CP3003-SA-1.7D-4-4R-E2-T-C (CP3003-SA Dual Core, 4GB, 4HP, Rear IO, HDD Mezzanine, TPM, E2, Coating), in stock, ready to ship
BoardCP3003-SA-2.1Q-8-4F-T
Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Front I/O, with TPM

CP3003-SA-2.1Q-8-4R-T
Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Rear I/O, with TPM

CP3003-SA-2.1Q-8-8R-T
Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, with TPM

CP3003-SA-2.5D-4-8F-T
Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Front I/O, with TPM

CP3003-SA-2.5D-8-8R-T
Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, with TPM

CP3003-SA-2.5D-8-8XR-T
Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-XMC, Rear I/O, with TPM

CP3003-SA-1.7D-4-4F-E2-T
Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP, Front I/O, extended temp. E2, with TPM

CP3003-SA-1.7D-8-8R-E2-T
Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD, Rear I/O, extended temp. E2, with TPM
AccessoriesCP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors)
CP-RIO3-04 8HP rear I/O module (additional to 4HP COMA/B)
CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors)

Need storage - try Innodisk SSD