Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron CP3010-SA - 3U CompactPCI® Intel® Celeron® Value Line CPU Board

Up to 4 GB DDR3 ECC SDRAM, up to -40 to +85°C Operation

Kontron CP3003-V - 3U CompactPCI Intel Celeron Board
Key Features
32-bit 8HP CompactPCI® system slot
Intel® Celeron®, 3rd generation
Up to 4GB SODIMM DDR3 with ECC
CFast and onboard HDD options
SATA 6Gb/s & USB 3.0 support
VGA/dual DP, multiple Ethernet channels
0 to +60°C fanless operation

Introduction

Optimized for reduced costs delivering maximum value, the CP3003-V combines the capabilities of an all-in-one industrial PC with the advantages of a robust 3U CompactPCI design.

The CP3003-V features the Intel® Celeron® 807UE processor (2nd Generation Core technology) combined with the Mobile Intel® QM77 Express PCH. Thereby the board offers an all-round package of up-to-date communication interfaces combined with solid graphics and processing performance all at a competitive price level.

Specification

CPU

CPU SpecIntel® Celeron® Processor (32nm technology): 807UE: Single-Core 1.0 GHz, 1MB cache
ChipsetMobile Intel® QM77 Platform Controller Hub
MemoryUp to 4GB 1333MHz DDR3 memory, with ECC, only 1x memory channel supported
GraphicsIntegrated Intel® GMA HD 4000 iGFX, Triple Independent Display, Support for BluRay 2.0, AVC/H.264, VC1, WMV9, OpenGL 4.0, DirectX® 11, OpenCL 1.1
• Support for up to 3x independent graphics outputs
• Supports analog display resolutions up to 2048 x 1536 pixels @ 75 Hz
• Supports digital display resolutions up to 2560 x 1600 pixels @ 60 Hz
• Dynamic Video Memory Technology (DVMT)
NetworkThree 1000BASE-T interfaces with WOL (Wake-on-LAN) support, Intel® 82574L Ethernet controller
StorageHDD: Onboard 2.5" SATA SSD/HDD installation via 8HP extension
CFast: Onboard CFast installation via 8HP extension
SATA: 1x SATA connector for connecting a SATA 2.5" HDD/SSD (SATA 6Gb/s)
SerialXR16L2750IM-F UART, 16C550-compatible
Front I/OVGA: 1x VGA-CRT 15-pin D-Sub connector
USB: 2x USB 2.0 ports, 4-pin standard USB connectors, 1x USB 3.0 port, 9-pin type-A connector
Ethernet: 3x RJ-45 with integrated LEDs (ACT, SPEED)
DisplayPort: 2x 20-pin DisplayPort connectors, DVI/HDMI capable through passive cable adapter
Serial Port: 1x 16C550-compatible serial port, RS232 signalling, RJ-45
Control: Reset button, HDD activity LED
LEDs: 4x POST Code or General Purpose, WD, TH
OtherWatchdog: FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage confi guration
RTC: Integrated in PCH, with 256 Byte CMOS RAM
Trusted Platform Module (TPM): Atmel AT97SC3204 TPM 1.2 controller

Onboard Interfaces:
SATA Cable Connector 1x onboard standard 7-pin SATA connector with locking mechanism, SATA 6Gb/s
High-Speed Extension Connectors 2x high-speed connectors holding:
• PCI Express
• One SATA 3Gb/s
• One SATA 6Gb/s
• 2x USB 2.0/3.0
• 2x DisplayPort
• COM1 (TTL)
• HDA
• LPC
SATA Extension Connector 1x 18-pin connector holding one SATA port for the SATA NAND Flash module
BIOSAMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board configuration via Shell, diskless, keyboardless, videoless operation

General

ExpansionPICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz (66MHz on request), version with rear I/O via J2
Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines
Operating in system slot as system master and in peripheral slot in PCI passive mode
CompactPCI Core Specification PICMG 2.0 Rev. 3.0
CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0
ElectricalSupply voltage/power consumption:
• +5.0V (4.85 V min. to 5.25 V max)
• +3.3V (3.2 V min. to 3.47 V max)
• +5.0V STDBY (optional, 4.85 V min. to 5.25 V max)
• 11W power consumption
Mechanical100 x 160mm, 3U/8HP
Conformal Coatingon request
SoftwareSupport for Windows® XP, Windows® 7, Windows® Embedded Standard 7, Windows® Server 2003/2008, Linux, VxWorks®, QNX®
TemperatureTemperature range (operation): 0 to +60°C
Temperature range (storage): -40 to +85°C
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weight460 g
MTBF233,687 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C
Safety/CertificationUL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1
EMCEN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2
Warranty2 Years
RoHSCompliant

Ordering Details

BoardCP3003-V-1.0S-2-8F
Celeron 807UE, Single-Core 1.0 GHz, 1MB cache, 2GB DDR3 SODIMM (one memory channel), 8HP, Front I/O
AccessoriesN/A

Need storage - try Innodisk SSD