Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro F23P - 3U CompactPCI® PlusIO Intel® Core™ i7 CPU Board

Up to 16 GB ECC DDR3 SDRAM, -40 to +85°C Operation

MEN Mikro F23P - 3U cPCI PlusIO Intel Core i7 Board
Key Features
3U, Intel® Core™ i7, 4th generation
CompactPCI® 2.0 or CompactPCI® PlusIO 2.30
Up to quad-core 64-bit processor
32-bit 4HP system master (or stand-alone)
Up to 16 GB DDR3 DRAM soldered, ECC
microSD™ card and mSATA slots
Up to -40 to +85°C operation, screened

Introduction

The F23P versatile 3U 4HP single-board computer is a member of the scalable family of Intel® CPU boards which ensures future-safety and long-term availability of a system.

The F23P can be equipped with the whole range of Intel®'s fourth generation Core i7, Core i5, Core i3 and Celeron® processors offering up to 3.4 GHz maximum turbo frequency and the latest quad core processor architecture from Intel® with full 64-bit support, Turbo Boost, Hyper-Threading, Active Management Technology and Virtualization Technology.

An excellent graphics performance, thermal supervision of the processor and a watchdog for the operating system top off the functionality of the F23P.

A Trusted Platform Module is assembled for platform integrity.

The F23P comes with a tailored passive heat sink. The robust design of the F23P - all components including the DDR3 DRAM are soldered - makes the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F23P is also ready for coating for use in humid and dusty environments. Using a special frame, the F23P can quickly be adapted to conduction-cooled systems.

The F23P supports the CompactPCI® PlusIO (PICMG 2.30) specification, meaning it can be used in a hybrid system for control of both CompactPCI® and CompactPCI® Serial peripheral boards. Compliant to the standard, 4 USB 2.0, 4 PCI Express® x1, 4 SATA 6 Gb/s interfaces as well as one Gigabit Ethernet are accessible on the J2 rear I/O connector.

The standard I/O available at the front panel of F23P includes VGA, two Gigabit Ethernet and two USB 2.0 ports. The F23P can be extended by different side cards. Additional functions include a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio.

The F23P operates in Windows® and Linux environments as well as under real-time operating systems that support Intel®'s multi-core architecture. The InsydeH2O™ EFI BIOS was specially designed for embedded system applications.

The F23P is the perfect choice for all applications in harsh environments where high computing and graphics performance is needed.

Specification

CPU

CPU SpecIntel® Core i7-4700EQ
• Up to 2.4 GHz processor core frequency
• 3.4 GHz maximum turbo frequency
• 6 MB last level cache integrated
• Four cores, eight threads
• 45 W TDP

Celeron® 2002E
• 1.4 GHz processor core frequency
• 2 MB last level cache integrated
• Two cores, two threads
• 25 W TDP
ChipsetIntel® QM87 Platform Controller Hub (PCH)
MemorySystem Memory
• Soldered DDR3, ECC support
• 4 GB, 8 GB, or 16 GB

Boot Flash
• 16 MB
GraphicsIntegrated in QM87 chipset
Maximum resolution: 1920x2000 pixels
24-bit color at 60 Hz (reduced blanking)
Simultaneous connection of two monitors

Video
• One VGA connector
• Additional interfaces are available via a side card
NetworkEthernet
• Two RJ45 connectors, 1000BASE-T (1 Gbit/s), or
• One RJ45 connector, 1000BASE-T (1 Gbit/s), or
• One 9-pin D-Sub connector, two 100BASE-T (100 Mbit/s), or
• Two M12 connectors on 8 HP, two 1000BASE-T (1000 Mbit/s)
• One front channel can optionally be led to the backplane
• Two link and activity LEDs per channel
StorageThe following mass storage devices can be assembled:
• microSD™ card
• mSATA disk
ExpansionCompactPCI® Core Specification PICMG 2.0 R3.0
• System slot
• 32-bit/33 or 66-MHz CompactPCI® bus
• V(I/O): +3.3V (+5V tolerant)
• The board can be supplied with +5V only, all other voltages are generated on the board. The backplane connectors are used for power supply only.
USBUSB
• Two Series A connectors, USB 2.0 (480 Mbit/s)
Front I/OVGA
Two USB 2.0 (Series A)
Two Ethernet (RJ45)
Rear I/OCompatible with PICMG 2.30 CompactPCI® PlusIO
• 1PCI33/4PCIE5/4SATA6/4USB2/1ETH1G, or
• 1PCI33/4PCIE5/4SATA6/4USB2/2ETH1G

SATA
• Four channels, SATA Revision 3.x (6 Gbit/s), RAID level 0/1/5/10 support

USB
• Four channels, USB 2.0 (480 Mbit/s)

Ethernet
• One channel, 1000BASE-T (1 Gbit/s), or
• Two channels, 1000BASE-T (1 Gbit/s)
• One front channel can optionally be led to the backplane

PCI Express®
• Four x1 links (500 MB/s per link), PCIe® 2.x (5 Gbit/s per lane)
• One x4 link (2 GB/s per link), PCIe® 2.x (5 Gbit/s per lane)
OtherOnboard Interfaces: An onboard connector allows a side card to be plugged onto the CPU board to add front panel connections or mass storage devices. A range of standard side cards is available to implement different functions.

DisplayPort®/HDMI
• Two channels

HD Audio
• One channel

SATA
• One channel, SATA Revision 2.x (3 Gbit/s), RAID level 0/1/5/10 support

USB
• Four channels, USB 2.0 (480 Mbit/s)

PCI Express®
• Three x1 links (500 MB/s per link), PCIe® 2.x (5 Gbit/s per lane)
CommonBoard controller
Watchdog timer
Temperature measurement
Real-time clock with supercapacitor or battery backup
Intel® Active Management Technology
BIOSInsydeH2O™ UEFI Framework

General

ElectricalSupply voltages
• +5 V (-3%/+5%)
• +3.3 V (-3%/+5%)
• +12 V (-10%/+10%)
The board can be supplied with +5V only, all other voltages are generated on the board. The backplane connectors are used for power supply only.
MechanicalDimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 3U, 4 HP, or 3U, 8 HP
Conformal Coatingon request
SoftwareNote that 64-bit hardware technology can be used in an optimal way with 64-bit operating system support
Windows®
Linux
VxWorks® (on request)
QNX® (on request)
Intel® Virtualization Technology, allows a platform to run multiple operating systems and applications in independent partitions; one computer system can function as multiple "virtual" systems
TemperatureTemperature range (operation):
• -40°C to +85°C (model 02F023P00)
• 0°C to +60°C (model 02F023P01)
• Airflow 1.5 m/s
• Depends on system configuration (CPU, hard disk, heat sink...)
Temperature range (storage): -40..+85°C

Cooling concept
• Air-cooled
• Conduction-cooled in MEN CCA frame
HumidityRelative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Weight388 g (model 02F023P00)
VibrationVibration (function): 1 m/s², 5 Hz - 150 Hz
Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
ShockShock: 50 m/s², 30 ms
MTBFMTBF: 549 414 h @ 40°C according to IEC/TR 62380 (RDF2000) (model 02F023P00)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCEN 55022 (radio disturbance)
IEC 61000-4-2 (ESD)
IEC 61000-4-3 (electromagnetic field immunity)
IEC 61000-4-4 (burst)
IEC 61000-4-5 (surge)
IEC 61000-4-6 (conducted disturbances)
Warranty2 Years
RoHSCompliant

Ordering Details

Board02F023P00
F23P, 3U CompactPCI® (PICMG 2.0) and CompactPCI® PlusIO (PICMG 2.30) SBC, Intel® Celeron® 2002E, 1.5 GHz, 4GB DDR3 DRAM with ECC, RTC battery, TPM, -40..+85°C screened

02F023P01
F23P, 3U CompactPCI® (PICMG 2.0) and CompactPCI® PlusIO (PICMG 2.30) SBC, Intel® Core™ i7-4700EQ, 2.4 GHz, (turbo boost 3.4GHz), 16 GB DDR3 DRAM with ECC, RTC battery, TPM, 0..+60°C screened

02F023P02
F23P, 3U CompactPCI® (PICMG 2.0) and CompactPCI® PlusIO (PICMG 2.30) SBC, Intel® Celeron® 2002E, 1.5 GHz, 4GB DDR3 DRAM with ECC, 2 M12 for Gb ETH, RTC battery, TPM, -40..+85°C screened, conformal coating
Accessories02F600-00
2 COM extensions and SATA hard disk slot, for F14 and compatible SBCs, -40..+85°C screened

02F601-00
1 DVI-D and 1 audio at front, SATA hard disk slot, for F14 and compatible SBCs, 4HP, 0..+60°C

02F603-00
3U CompactPCI® side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash® slot, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C

02F606-002 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter not included), SATA hard disk slot, for F14 and compatible SBCs, conformally coated, -40...+85°C screened

08CT12-00
CompactPCI® PlusIO rear transition module 3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe® x1, -40°C..+85°C qualified

Need storage - try Innodisk SSD