Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro F211 - 3U CompactPCI® Quad Fast Ethernet Interface

Four 10/100Base-TX Interfaces, -40 to +85°C Screened

Introduction

The F211 is a single Eurocard CompactPCI® networking controller that needs only one slot on the CompactPCI® bus.

The four Fast Ethernet channels on one card occupy four individual MAC/IP addresses. They support full-duplex or half-duplex with 10Base-T and 100Base-TX physical layers for distances up to 100 m. Featuring auto-negotiation, collision and link detection the maximum data transfer rate per channel is 200 Mbit/s with full-duplex operation.

The Ethernet channels on the F211 can be used individually as well as in redundant mode for high-availability systems by using some of the Ethernet ports in parallel.

The F211 has been designed for rugged and mobile applications with demand for multiple network controllers such as firewalls, gateways, routers, or as a fieldbus data concentrator based on industrial Ethernet.

The F211 is qualified for extended operation temperature and prepared for conformal coating for use in harsh and mobile environments.

Specification

Ethernet/WLAN

Interface(s)Four 10/100Base-TX interfaces
Four Micrel KSZ8841 controllers
IEEE802.3x support
• Full-duplex flow control
• Half-duplex back pressure collision flow control
Internal 8KB RX/TX FIFO buffers
Auto-negotiation and auto MDIX crossover
LinkMD® cable diagnostics to determine cable length, cable faults and distance to fault
Media Access Control (MAC) addresses stored in onboard serial EEPROMs
4x2 status LEDs to signal link status, activity, speed and collision
Connection(s)Four standard 8-pin RJ45 receptacle connectors

General

ExpansionCompliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V or +5V (Universal Board)
ElectricalIsolation voltage: 1000V between Ethernet links and 1500V between Ethernet links and shield or ground
Supply voltage/power consumption:
• +3.3V (-3%/+5%), 1A max.
MechanicalDimensions: conforming to CompactPCI® specification for 3U boards
Conformal CoatingConformal coating on request
SoftwareDrivers for Linux and Windows® from Micrel
Driver for QNX® from QNX®
TemperatureTemperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Weight115g (standard version)
Vibration(sinusoidal): 2g/10..150Hz
Shock15 g, 11 ms (EN 60068-2-27)
MTBF875,481h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCTested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years
RoHSCompliant

Ordering Details

Board02F211-00
4 100Base-T Ethernet interfaces, 4 RJ45 connectors at front, -40..+85°C with qualified components

Options (MOQ may apply):
4 Ethernet channels on 4 D-Sub connectors, 2-slot front panel (8 HP)
4 Ethernet channels on 2 D-Sub connectors (shared), 1-slot front panel (4 HP)
4 Ethernet channels on 4 M12 receptacle connectors, 2-slot front panel (8 HP)
Also available with conduction cooling in MEN CCA frame
AccessoriesN/A