Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro F203

3U CompactPCI® PC-MIP® Carrier Board

3 PC-MIP® slots

 
MEN F203 3U CompactPCI® PC-MIP® Carrier Board with 2 PC-MIP slots
  
  • 1 CompactPCI® bus slot
  • 3 PC-MIP® slots
  • ROHS compliant



Datasheet/Manual:

MEN F203 datasheet in PDF format MEN Mikro F203 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The F203 is a 3U PC-MIP® carrier board for universal I/O on the CompactPCI® bus. You can install up to three PC-MIPs on the F203, with two Type I/II PC-MIPs and one Type I PC-MIP®.

Two Type II modules or one double PC-MIP® module are accessible at the front panel. Rear I/O via the PCMIP ®'s J3 connectors, however, is not possible for any of the three modules.

Even populated with three PC-MIPs, the F203 needs only one slot on the CompactPCI® bus. PC-MIPs are an ideal solution for flexible and fast CPU-related applications, which can make advantage out of the internal PCI bus of the PC-MIPs.
 
 

Specification

CompactPCI® Bus:

Compliance with CompactPCI® Specification 2.0 R2.1
Only one slot required on the 3U CompactPCI® bus
DECchip 21150 PCI-to-PCI bridge

  • Target and/or initiator on PCI bus
  • Max. clock frequency 33MHz
  • Power supply 5V and 3.3V

Compliance with PCI Specification 2.1
32-bit PCI data bus
V(I/O): +3.3V or +5V (Universal Board)

PC-MIPs:

Up to three PC-MIP® modules on one board
Support of 1 Type I and 2 Type II modules
Local 32-bit PCI bus

Peripheral Connections:

Via front panel

Electrical:

Supply voltage/power consumption:

  • +5V (4.85V..5.25V), 5mA typ.
  • +3.3V (3.2V..3.5V), 150mA typ.

MTBF: 80,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: aluminum with 1 handle
Weight: 160g

Environmental:

Temperature range (operation):

  • 0 to +60°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software:

PC-MIP® drivers for Windows®, VxWorks®, Linux, QNX®, OS-9® as supported

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

02F203-00 PC-MIP carrier board, 0...+60°C

Accessories:

N/A

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.