Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro CT7

3 Slot, 3U compactPCI Single Euro enclosure with Conduction Cooling

For standard 3U cards within CCA frames, -40 to +70°C operating temperature
 
MEN Mikro CT7 transition module
  
  • 6U / 80 mm standard format
  • 2 Gigabit Ethernet
  • 2 USB 2.0
  • 2 UARTs
  • 2 PIM slots
  • PATA/SATA hard disk
  • CompactFlash®
  • External battery



Datasheet/Manual:

MEN CT7 datasheet in PDF format MEN Mikro CT7 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The CT7 is a 6U CompactPCI® transition module for use in combination with MEN's D9 Intel®-based CompactPCI® single-board computer. It is plugged onto J3/J4/J5 of the CompactPCI® backplane system slot from the rear side and leads the rear-panel I/O signals to standard connectors. Consequently, standard cables can be used to connect drives and other peripherals.

If a hard disk is mounted (instead of a CompactFlash® card), the 4HP transition module extends to 8HP, doing then also without one of the two PIM slots.
 
 

Specification

Peripheral Connections:

Up to 2 PIM interfaces
1 PATA/SATA interface (instead of one PIM)
2 USB
2 Gigabit Ethernet
2 COMs (via SA-Adapter™ instead of one PIM)
1 port for CompactFlash® (instead of one PIM)

Miscellaneous:

External battery
Reset button
4 user-defined LEDs (FPGA-controlled)

Electrical:

MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical:

Dimensions: 6U width, 80mm depth, 4HP height (8HP with 2.5" hard disk)
Conforming to CompactPCI® Specification 2.0 R2.1 for rear panel I/O boards
Conforming to IEEE1101.11, draft 5.0
Weight: 246g (with two SA-Adapters™)

Environmental:

Temperature range (operation):

  • 0 to +60°C
  • Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Compatibility:

Suited for MEN Boards..
D9
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

08CT07-00
CompactPCI rear I/O transition module 6U/80mm, 2 Gb Ethernet, 2 USB 2.0, 2 COMs, 1 PIM slot, 1 CompactFlash slot, connecting to D6, D7, D9, 0..+60°C

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.