Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro F11S

3U CompactPCIŽ Intel® Atom® SBC

Intel® Core™ 2 Duo T7400 or L7400, Up To 2GB Soldered DDR2 Memory
 
MEN F11S 3U compactPCI Intel Atom SBC
  
  • 32-bit 8HP CompactPCI® system slot
  • Intel® Atom™ Z510P, Z530P, Z510PT, Z520PT
  • Up to 2GB DDR2 SDRAM
  • 2 MB SRAM
  • CompactFlash®
  • microSD™ slot
  • 1 SATA interface via rear I/O
  • VGA, 2 USB, PS/2, 1 UART
  • 1 Gigabit and 1 Fast Ethernet
  • FPGA for individual user I/O at rear
  • -40..+85°C screened or with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN F11S datasheet in PDF format MEN Mikro F11S Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The F11S single-board computer is a versatile 3U Eurocard CompactPCI® board, taking 8 HP or more front space depending on its configuration. It is equipped with the Intel® Atom™ XL processor, an IA-32 core based on 45nm process technology. Some processor versions are qualified for the extended temperature range. Due to the low power architecture of the Intel® Atom™ processor, the F11S has a total power consumption of max. 5 to 7 Watts, while having a clock frequency of up to 1.6 GHz. A specially outlined heat sink efficiently takes away the heat from the board, even in extended temperature range.

The F11S is designed especially for systems which require low power consumption, e.g. as a computing platform for rugged industrial PCs in mobile applications or for infotainment applications, offering the whole world of Windows® and Linux based software.

The F11S accommodates up to 2 GB of directly soldered main memory, 2 MB SRAM and an SPI boot flash. A SATA interface is available at CompactPCI® connector J2. The storage capacity is completed by a CompactFlash® socket and a microSD™ card slot.

One Gigabit Ethernet via one PCI Express® x1 link from the Intel® System Controller Hub US15WP and one FPGA controlled Fast Ethernet via RJ45 connectors are available at the front. Further standard front I/O interfaces are one COM via a D-Sub connector, two USB 2.0, graphics (VGA up to UXGA) and keyboard/mouse.

An on-board FPGA allows implementation of additional functionality such as serial interfaces, CAN bus controllers, binary I/O, protocol converters, touch controllers etc. to the needs of the individual application in a very flexible way. Before boot-up of the system, the FPGA is loaded from the boot Flash. Updates of the FPGA contents can be made inside the boot Flash during operation and are available after a power-off of the system. A maximum of 3 SA-Adapters™ can be realized on one F11S, with I/O accessible at the front panel.

The F11S is completed by a board management controller for temperature and power supervision. It comes with a Phoenix® Award BIOS configurable for the final application.

The F11S is screened or qualified for operation in a -40°C to +85°C conduction or convection cooled environment.
 
 

Specification

CPU:

Intel® Atom™ Z510P, Z530P, Z510PT or Z520PT
Up to 1.6GHz processor core frequency
400MHz or 533MHz system bus frequency

Chipset:

Intel® system controller hub US15WP

Memory:

512KB L2 cache integrated in Atom processor
Up to 2GB DDR2 SDRAM system memory

  • Soldered
  • 400/533MHz memory bus frequency locked to the FSB frequency

2MB boot Flash
2MB non-volatile SRAM, FPGA-controlled
CompactFlash® card interface, via USB, Type I, DMA support
One microSD™ card slot via USB, compliant to SDIO Revision 1.1 and MMC Revision 4.0 (backward-compatible)

Mass Storage:

Serial ATA (SATA)

  • Transfer rates up to 100MB/s
  • Via PATA-to-SATA converter
  • Accessible on rear I/O connector J2

Graphics:

Integrated in Intel® System Controller Hub US15WP
Maximum resolution: 1600x1200 pixels
VGA connector at front panel, via SDVO port from chipset
I/O:

USB:

  • Two Series A connectors at front panel
  • One USB for PS/2 interface
  • One USB for connection of CompactFlash®/microSD™
  • UHCI and EHCI implementation
  • Data rates up to 480Mbits/s

Ethernet:

  • One 10/100/1000Base-T Ethernet channel
  • Via one PCI Express® x1 link from the chipset
  • One 10/100Base-T Ethernet channel
  • FPGA-controlled
  • RJ45 connectors at front panel
  • Two status LEDs for each channel

One RS232 UART, FPGA-controlled:

  • D-Sub connector at front panel
  • Via SA-Adapter™
  • Data rates up to 115.2kbits/s
  • 60-byte transmit/receive buffer
  • Handshake lines: CTS, RTS; DCD, DSR, DTR; RI

66 user I/O lines, FPGA-controlled:

  • Depending on FPGA configuration
  • Accessible via rear I/O connector

PS/2 keyboard/mouse:

  • PS/2 connector at front panel
  • Via USB-PS/2 converter

Front Connections (Standard):

VGA
Two USB 2.0 (Series A)
Two Ethernet (RJ45)
One COM (D-Sub)
PS/2

FPGA:

Standard factory FPGA configuration:

  • Main bus interface
  • 16Z024_SRAM - SRAM controller
  • 16Z125_UART - UART controller
  • 16Z087_ETH - Ethernet controller
  • 16Z034_GPIO - GPIO controller

The FPGA offers the possibility to add customized I/O functionality. Refer to datasheet for further information.

PCI Express®:

One x1 link to connect local 1000Base-T Ethernet controller
One x1 link for connection of PCI Express® to PCI bridge
Data rate 250MB/s (2.5 Gbits/s per lane)

Miscellaneous:

Real-time clock buffered by a GoldCap or alternatively a battery (5 years life cycle)
Power supervision and watchdog
Temperature measurement
One status LED from board controller
One FPGA status LED
Six user LEDs (FPGA-controlled)
Reset button

CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
System slot
32-bit/33-MHz PCI Express®-to-PCI bridge
V(I/O): +3.3V

Power:

Supply voltage/power consumption:

  • +5V (-3%/+5%), 0.9A typ. (with network connection)
  • +3.3V (-3%/+5%), 0.9A typ. (with network connection)
  • +12V (-5%/+5%), only provided for detection of 3.3V

Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 8HP with ejector
Weight: 485g

Environmental:

Temperature range (operation):

  • -40°C to +85°C (screened)
  • Airflow: min. 15m³/h (1.5m/s)

Temperature range (storage): -40°C to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 Class A (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst) and EN 61000-4-5 (surge) with regard to CE conformity

BIOS:

Award BIOS

Software Support:

Windows®
Linux
VxWorks® (on request)
QNX® (on request)

MTBF:

To be done

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F011S00
Intel® Atom™ Z530P 1.6GHz, 1GB DDR2 RAM, 2MB SRAM, CompactFlash® and microSD™, 2 Ethernet via RJ45 (1Gbit, 100Mbit), 1 COM, 2 USB 2.0,keyboard/mouse, VGA, 8TE, -40..+85°C screened

Please note that some of these options may only be available for large volumes. Please sales for more information.
Accessories:

08CT12-00
CompactPCI PlusIO rear transition module 3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe x1, -40°C..+85°C qualified
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.