Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro F608

3U CompactPCI® Side Card for RAID Systems

4/8 HP extension for 3U Intel® SBCs F14, F15, F17, F18, F19P
 
MEN Mikro F608
  
  • 4/8 HP extension for 3U Intel® SBCs F14, F15, F17, F18, F19P
  • 4 SATA ports via J2 rear I/O
  • RAID 0, 1 and 5 support
  • CompactPCI® PlusIO compliant
  • 1 SATA hard-disk slot 2.5" on board
  • 2 COMs via SA-Adapters™
  • Optical isolation depending on SA-Adapter™
  • Two optical Gigabit Ethernet interfaces via
  • FP as an option
  • ROHS compliant



Datasheet/Manual:

MEN F608 datasheet in PDF format MEN Mikro F608 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The F608 is a 4HP SATA extension card for 3U Intel® based CompactPCI® single-board computers. It can be used in combination with the F14 and further boards of the Intel® low power family.

It offers four SATA interfaces over a SATA port multiplier via PCI Express® as well as one SATA slot on-board (from the chipset). Two individually configurable UARTs are accessible via D-Sub connector at the front. Two USB and two PCI Express® links are available via rear I/O. As an option, the F608 also offers the possibility to realize two optical Ethernet interfaces via SFP.

The F608 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel. The operating temperature range is 0 to 60°C.
 
 

Specification

Mass Storage:

One serial ATA (SATA) port for onboard 2.5" hard-disk drive:

  • Transfer rates up to 150MB/s (depends on hard disk)
  • RAID level 0/1 support (depends on CPU board)

Four serial ATA (SATA) ports via rear I/O:

  • Onboard SATA controller via one PCI Express® lane from the chipset
  • Port multiplier
  • Transfer rates up to 150MB/s
  • RAID level 0/1/5 support

UART:

Two at front panel
Physical interface using SA-Adapter™ via 10-pin connector
RS232..RS422, isolated or not
Only full duplex operation for RS422
Data rates up to 230.4kbit/s
FIFO receive and transmit buffers for high data throughput
Handshake lines: full support; lines depend on SA-Adapters™

USB:

Two 2.0 host ports via rear I/O
Data rates up to 480Mbits/s

PCI Express®:

Two x1 links via rear I/O
Data rate 250MB/s in each direction (2.5 Gbits/s per lane)

Miscellaneous:

CompactPCI® J1 is assembled for increased mechanical stability and/or for power supply
CompactPCI® J2 is used for rear I/O

Electrical:

Supply voltage/power consumption:
+5V (-3%/+5%), 3.8A
+3.3V (-3%/+5%),0.8A

Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Mountable on right side of the CPU
Weight: 150g (w/o hard disk and SA-Adapters™)

Environmental:

Temperature range (operation):

  • 0 to +60°C
  • o Airflow: 1.0m/s

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10 to 150Hz
Conformal coating on request

MTBF:

1,944,987h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software:

Driver software can be found in the data sheet of the CPU board that you use.

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

02F608-00 4 SATA and 2 COM ports, additional SATA hard disk slot on-board, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C

Accessories:

08SA01-00 RS232, not optically isolated, 0..+60°C
08SA02-01 RS422/485, full duplex, optically isolated, 0..+60°C
08SA02-07 RS422/485, full duplex, optically isolated, -40..+85°C screened
08SA03-00 RS232, optically isolated, 0..+60°C
08SA03-01 RS232, optically isolated, -40..+85°C screened
08SA22-00 IBIS master SA-Adapter, -40..+85°C screened
08SA22-01 IBIS slave SA-Adapter, -40..+85°C screened

0710-0018 SATA150 hard disk 2.5" 60GB, 5400rpm, 8MB cache, NCQ, +5..+55°C (incl. mounting screws)
0710-0025 SATA hard disk 2.5", 80 GB, 5400 rpm, 24h/7d, -30..+85°C; N.B.: between -30°C to -20°C power-on time is 12 s typ. (incl.stand-offs and mounting screws)

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.