Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro G211

3U CompactPCI® Serial Quad Gigabit Ethernet Interface

RJ45 or robust M12 connectors, -40 to +85°C screened
 
MEN G211 CompactPCI Serial Quad Gigabit Board
  
  • 4 HP CompactPCI® Serial
  • Peripheral card for proposed PICMG CPCI-S.0
    (under dev.)
  • Four 10/100/1000Base-T Ethernet channels
  • Alternatively two redundant channel pairs
  • Full-duplex or half-duplex
  • RJ45 or robust M12 connectors
  • Fully integrated to comply with IEEE802.3u
  • 1500 V isolation voltage
  • -40 to +85°C screened
  • ROHS compliant



Datasheet/Manual:

MEN G211 datasheet in PDF format MEN Mikro G211 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The G211 is a rugged single Eurocard CompactPCI® Serial peripheral board. It can be used in combination with a CompactPCI® Serial or CompactPCI® PlusIO CPU board in a CompactPCI® Serial or hybrid system.

It provides four Gigabit Ethernet interfaces at the front panel which can be accessed either on four RJ45 or four M12 connectors making it especially suited for applications in harsh environments. All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express® link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 500 Mbit/s if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface.

The G211 is screened for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments.
 
 

Specification

Ethernet:

Four 10/100/1000Base-T interfaces
IEEE802.3x support

  • Full-duplex flow control
  • Half-duplex back pressure collision flow control
  • 500 Mbit/s data transfer rate for each interface

4x2 status LEDs to signal link status, activity, speed and collision

Front Connections:

Four standard 8-pin RJ45 or M12 receptacle connectors

CompactPCI® Serial:

Compliance with CompactPCI® Serial Specification PICMG CPCI-S.0 (proposed standard currently under development)
Peripheral slot

Electrical:

Isolation voltage: 1500V between Ethernet links and between Ethernet links and shield or ground
Supply voltage/power consumption: +12V (-5%/+5%), tbd

Mechanical:

Dimensions: conforming to CompactPCI® Serial specification for 3U boards
Weight: tbd (without mezzanine card)

Environmental:

Temperature range (operation):

  • -40 to +85°C (screened)
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/ 10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

tbd

MTBF:

tbd @ 40°C according to IEC/TR 62380 (RDF2000)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

02G211-00 4 1000Base-T Ethernet interfaces, 4 RJ45 connectors at front, 0 to +60°C screened
02G211-01 4 1000Base-T Ethernet interfaces, 4 M12 connectors at front, -40 to +85°C screened

Accessories:

02G020-01 Intel Core i7-610E, 2.53 GHz, 4 GB DDR3 DRAM with ECC, 0 to +60°C
02G212-00 compactPCI Serial 2 PCI Express MiniCard slots (USB and PCIe), -40 to +85°C screened
02G213-00 compactPCI Serial PMC/XMC carrier board, -40 to +85°C screened
02G501-00 compactPCI Serial SATA HDD/SSD carrier, -40 to +85°C with qualified components
0701-0056 compactPCI/CompactPCI Serial 19" 4U/84HP rack-mount enclosure for 3U cards (vertical)

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.