Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro G211F

3U CompactPCI® Serial Quad Gigabit Ethernet Fiber Optics Interface

Four optical transceiver channels 1000BASE-SX
 
MEN Mikro G211F
  
  • Four optical transceiver channels 1000BASE-SX
  • Alternatively two redundant channel pairs
  • Full-duplex or half-duplex depending on transceiver
  • Fully integrated to comply with IEEE802.3x
  • 500 V isolation voltage
  • -40 to +85°C screened (without transceivers)
  • 4HP PICMG CPCI-S.0 CompactPCI® Serial peripheral card
  • ROHS compliant



Datasheet/Manual:

MEN Mikro G211F datasheet in PDF format MEN Mikro G211F Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The G211F is a rugged 3U CompactPCI® Serial peripheral board. It offers the possibility to implement four optical fiber Ethernet interfaces. The board is equipped with a cage for connection of four SFP transceivers. The cage hosts the optical adapter. The cables are connected to the adapter module. MEN offers an optical transceiver with LC-Duplex connectors as an accessory.

All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express® link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 500 Mbit/s if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface.

The G211F can be used in combination with a CompactPCI® Serial or CompactPCI® PlusIO CPU board in a CompactPCI® Serial or hybrid system. It is screened for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments.
 
 

Specification

Ethernet Interfaces:

Four 10/100/1000Base-SX interfaces (Intel 82580 Quad Gigabit Ethernet Controller)
IEEE802.3x support

  • Full-duplex flow control
  • 500 Mbit/s data transfer rate for each interface when all 4 interfaces are used simultaneously

4x2 status LEDs to signal link status and activity

Front Connections:

Four SFP slots

CompactPCI® Serial:

Compliance with CompactPCI® Serial PICMG CPCI-S.0 Specification
Peripheral slot
Host interface: 1 PCI Express® x4 link

Electrical:

Isolation voltage: 500V between Ethernet links and between Ethernet links and shield or ground
Supply voltage/power consumption: +12V (-5%/+5%), 3.65 W typ./ 8 W max

Mechanical:

Dimensions: conforming to CompactPCI® Serial specification for 3U boards
Weight: 216 g (with heat sink)

Environmental:

Temperature range (operation):

  • -40..+85°C (qualified components)
  • Airflow: min. 1 m/s

Temperature range (storage): -40°C to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 50 m/s², 30 ms
Vibration (Function): 1 m/s², 5 Hz - 150 Hz
Vibration (Lifetime): 7.9 m/s², 5 Hz - 150 Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

MTBF:

MTBF: 311,742h @ 40°C according to IEC/TR 62380 (RDF 2000)

Software Support:

Windows®
Linux

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02G211F00 4-channel 1000Base-SX Ethernet SerDes, 4 SFP slots, -40..+85°C screened

Please note that some of these options may only be available for large volumes. Please sales for more information.
Accessories:

05G211F00 SFP optical transceiver for Gigabit Ethernet (1.25GBd), 1000BASE-SX, -40..+85°C
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.