Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M11

16-bit TTL I/O Interface M-Module

24 bits resolution, 40 to +85°C with qualified components
 
MEN Mikro M11 16-bit TTL I/O Interface M-Module
  
  • 18 TTL inputs/outputs
  • 4 handshake lines
  • Programmable timer
  • 24 bits resolution
  • -40 to +85°C with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN M11 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M11 is a TTL I/O M-Module™ with 16 lines (Ports A and B) that can be used separately as two ports with 8 bits each or together as a 16-bit port. Control of the I/O lines is via the four handshake lines. Depending on the operation mode, the four handshake lines generate an interlocked handshake, a pulsed handshake, interrupt inputs or simple inputs.

The M11 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

TTL I/O:

18 TTL inputs/outputs

68230 Parallel Interface Timer:

Port modes include:

  • Bit I/O
  • Unidirectional 8-bit and 16-bit
  • Bidirectional 8-bit and 16-bit

Programmable handshaking options
24-bit timer
Five separate interrupt vectors
Separate port and timer interrupt service requests

Input Voltages and Currents:

Input voltage "high" min. 2V, max. 5V
Input voltage "low" min. -0.3V, max. 0.8V
Input leakage current max. 10μA

Output Voltages and Currents:

Output current in "off-state" min. -0.1mA, max. -1mA
Output voltage "high" min. 2.4V (load < -0.15mA)
Output voltage "low" max. 0.5V (load < 2.4mA)

Peripheral Connections:

Via front panel on a shielded 25-pin D-Sub receptacle connector
Via carrier board (rear I/O)

M-Module™ Characteristics:

A08, D08, INTC, IDENT

Electrical:

Supply voltage/power consumption: +5V (4.85V..5.25V), 27mA typically without driving external loads
MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 68g

Environmental:

Temperature range (operation):

  • -40°C to +85°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M011-02 16-bit TTL I/O, -40..+85°C qualified

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.