Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M28

16 Binary Output M-Module

16 outputs with 8 to 36 V range, 0 to +60°C operation
 
M28
  
  • 16 outputs 8 to 36 V
  • 500 mA output current per channel
  • Thermal and short-circuit protection
  • Load on ground
  • Optical isolation
  • ROHS compliant



Datasheet/Manual:

MEN M28 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M28 with its open-emitter outputs can be used in process I/O applications (cf. M27 with open-collector outputs). If there are currents of above 500mA an intelligent power switch guarantees that the respective transistor is switched off. The M-Module™ is equipped with suppressor diodes for protection against overvoltage caused by inductive loads. The output registers can be read back.

The M28 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

Output Voltage:

8..36V; 500mA (closed)
2V max.; 10μA max. (open)

Output Current:

Max. 500mA per channel
No derating

Miscellaneous:

Load on ground
Thermal and short circuit protection

Peripheral Connections:

Via front panel on a shielded 25-pin D-Sub receptacle connector
Via carrier board (rear I/O)

M-Module™ Characteristics:

A08, D16, IDENT

Electrical:

Isolation voltage:

  • 500V DC between isolated side and digital side
  • Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 47nF capacitor

Supply voltage/power consumption: +5V (4.85V..5.25V), 100mA typ.
MTBF: 58,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 82g

Environmental:

Temperature range (operation):

  • 0°C to +60°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M028-00 16 binary source outputs, 0..+60°C

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.