Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M37N

4 Analog Outputs, 16 bit resolution

4 current or voltage outputs, -40 to +85°C with qualified components
 
MEN Mikro M37N 4 Analog Outputs, 16 bit M-Module
  
  • 4 current or voltage outputs
  • 16 bits resolution
  • <8.5 μs acquisition/conversion time
  • +/-0.1% accuracy
  • Simultaneous channel update
  • Synchronization with external trigger
  • Electrical isolation
  • -40 to +85°C with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN M37N datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M37N is a high-precision M-Module™ with four analog voltage, or alternatively current output channels for very fast signals. The output voltage range for each channel is -10 to +10V. The current outputs are separately available and can be used as 0 to 20mA outputs. The M-Module™ comes with 16 bits resolution at an ultra-high voltage accuracy of +/- 0.1% which is valid for the complete temperature range from -40 to +85°C. Beyond that it is optionally possible to even extend these values by additional calibration.

The M37N supports a load resistance of 600 Ohms and more. The isolated supply voltages can be generated on the board by two low-noise DC/DC converters. The output load is driven to ground. The M37N is designed for a large range of applications, for example in an automated test environment, in process control systems or for sensor measurements.

The M37N is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

D/A Conversion:

4 channels current or voltage output
16 bits
Conversion time of D/A converter: <10.5μs
Time between trigger activation and new valid output voltage: <20μs
Output linearity: ±1LSB
Simultaneous updating of all channels
Synchronization with external trigger
Electrically isolated (500V DC isolation)

Voltage Output:

Output current: ±6mA max.
Accuracy: ±0.1% (for whole temperature range)
Voltage range: -10V..+10V

Current Output:

Accuracy: ±0.5% (for whole temperature range)
Current range: 0..20mA
Max. load resistance: 600 Ohm (or higher with external power supply)

Peripheral Connections:

Via front panel on a shielded 25-pin D-Sub receptacle connector
Via carrier board (rear I/O)

M-Module™ Characteristics:

A08, D16, INTA, IDENT

Electrical:

Isolation voltage: 500V DC
Supply voltage/power consumption:

  • Through M-Module™-carrier with onboard DC/DC converter: +5V (4.85V..5.25V), 270mA typ., 620mA max.
  • Optional supply current for current transmitters 100 mA typ.

MTBF: 1,012,625h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 90g

Environmental:

Temperature range (operation):

  • -40°C to +85°C
  • Airflow: min. 10m³/h

Temperature range (storage): -40°C to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN55022 Class A (radio disturbance), EN61000-4-2 (ESD) and EN61000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M037N00 4 analog current/voltage outputs, DC/DC converter, -40...+85°C with qualified components

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.