Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M43

8 Relay Outputs M-Module

1 A switching power per relay, 0 to +60°C operation
 
M43
  
  • 8 relay outputs
  • 1 A switching power per relay
  • One throw-over contact per relay
  • Output voltage range max. 100 V
  • No separate supply voltage
  • ROHS compliant



Datasheet/Manual:

MEN M43 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M43 is a relay output M-Module™ for free potential switching of eight signals. It is designed for industrial process I/O applications. The relays implemented guarantee highest reliability and long life.

The M43 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

Relay Outputs:

8 outputs as throw-over contacts
NO (normally open), NC (normally closed) and common contacts

Ratings:

Maximum switching voltage: 48V
Maximum switching current: 3A
Maximum operation current: 1A
Maximum switching power: 60W

Switching Time:

2ms typ. for NO and NC

Miscellaneous:

Relay status can be read out - "read-modify-write" accesses possible
Low heat development by use of CMOS components

Peripheral Connections:

Via front panel on a shielded 25-pin D-Sub receptacle connector
Via carrier board (rear I/O)

M-Module™ Characteristics:

A08, D08, IDENT

Electrical:

Supply voltage/power consumption: +5V (-3%/+5%), 700mA typ. (all relays active)
MTBF: 1,000,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 98g

Environmental:

Temperature range (operation):

  • 0 or +60°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M043-00 8 relay outputs, 0 to +60°C

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.