Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M62N

16 current or voltage outputs, 16 bits resolution with voltage outputs

Electrical isolation (500 V DC), -40 to +85°C with qualified components
 
MEN Mikro M62N 16 channel analog output M-Module
  
  • 16 current or voltage outputs
  • 16 bits resolution with voltage outputs
  • 15 bits resolution with current outputs
  • Typ. 11.5 μs conversion time
  • Electrical isolation (500 V DC)
  • -40 to +85°C with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN M62N datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M62N is an analog output device with as many as 16 channels on one single M-Module™. The isolated supply voltages are generated by an on-board DC/DC converter. The output voltage range is programmable to 0 to 10V or -10 to +10V. Alternatively, current outputs are available within a range of 4 to 20mA. The output load is driven to ground.

For driving more than 6 current outputs at the same time an external supply is needed!

The M62N is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

D/A Conversion:

16 channels
Resolution:

  • 16 bits with voltage outputs (bipolar operation)
  • 15 bits with voltage outputs (unipolar operation)
  • 15 bits with current outputs

Register write to output settle time with ±1LSB full-scale step max. 13,5μs, typ. <11,5μs
D/A-converter relative accuracy (INL) ±1LSB
Reference

  • Temperature drift max. 2 ppm/°C
  • Initial error max. 1mV

Voltage Output:

Output current: 5mA max.
Accuracy: ±0.1%, ±1 LSB differential
Voltage ranges (programmable): 0..10V; -10V..+10V

Current Output:

Accuracy: ± 0.5%
Current range : 4..20mA (other ranges possible on request)
Max. output voltage 12.5V (or higher with external power supply)
Max. load resistance 500 Ohm (or higher with external power supply)

Possible Configurations:

16 voltage outputs
16 current outputs
8 voltage outputs (on request)
8 current outputs (on request)

Peripheral Connections:

Via front panel on a shielded 25-pin D-Sub receptacle connector
Via carrier board (rear I/O)

M-Module™ Characteristics:

A08, D16, IDENT
M-Module™ access time (timing parameter No. 3: /SELECT to /DTACK): 3,3 μs max.

Electrical:

Isolation voltage:

  • 500V DC between isolated side and digital side
  • 500V DC isolation voltage between isolated ground and shield. Voltage between the connector shield and isolated ground is limited by a protective device (varistor); AC coupling between connector shield and isolated ground through 47nF capacitor

Supply voltage/power consumption:

  • +5V (-3%/+5%), typ. 476 mA (voltage version, idle), typ. 488 mA (voltage version, output +10V), typ. 577 mA (current version, idle), typ. 661 mA (current version, 1 x 20mA)
  • Optional external supply : 16V..30V (24V typ.), current drawn depending on operating conditions

MTBF: tbd. @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 72g

Environmental:

Temperature range (operation):

  • -40°C to +85°C (qualified components)
  • Airflow: min. 10m³/h

Temperature range (storage): -40°C to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Conforming to IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M062N00 16 analog outputs 0..10V, 16 bits resolution, with DC/DC converter, -40..+85°C with qualified components
04M062N01 16 analog outputs 4..20mA, 15 bits resolution, with DC/DC converter, -40..+85°C with qualified components

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.