Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M66

32 Binary Inputs/Outputs

Mixed I/O in groups of 4, -40 to +85°C screened versions
 
M66
  
  • 32 inputs 0..32 V or
  • 32 outputs 12..32 V or
  • Mixed I/O in groups of 4
  • 1.9 A output current per channel
  • 16 A switching power on one M66
  • Load on ground
  • Optical isolation
  • -40 to +85°C screened versions
  • ROHS compliant



Datasheet/Manual:

MEN M66 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M66 provides 32 binary process signals on one single M-Module™, which is the largest number of binary channels ever seen on a mezzanine board. This allows a total of 128 signals with four M-Modules™ on a double Eurocard (i.e. in one slot of a VME or CPCI system). With its extremely high output current of 1.9A per channel, optical isolation and its over current and over-temperature protection mechanisms, the M66 is the M-Module™ of choice for advanced industrial and automotive applications.

The M66 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

Binary I/Os:

32 binary signals

  • 4 optically isolated units
  • 8 channels for each unit

Individual use of each channel as input or output
Individual edge-triggered interrupts
Input/output load on ground
High-side output switches
High output current

  • Max. 1.9A per channel
  • Max. 4A per unit

Over-current and over-temperature protection

Output Characteristics:

Output voltage range: 12V..32V
Output current log. 0: max. 10μA
Output current log. 1: max. 1.9A
Switching time for output change: 200μs typ.
Isolation voltage (optocoupler): 500V DC

Input Characteristics:

Input voltage min.: 0V
Input voltage max. external supply voltage (12..32V)
Voltage level log. 0: 0V..6V or open
Voltage level log. 1: 12V..32V
Input current log. 1: 4.4mA @ 24V
Switching threshold: 9.2V @ 0.78mA typ.
Switching time for input change: 200μs typ.
Excess voltage protection: ± 50V

Peripheral Connections:

Via front panel on a shielded 44-pin HD-Sub receptacle connector

M-Module™ Characteristics:

A08, D08, INTA, IDENT

Electrical:

Isolation voltage:

  • 500V DC between isolated side and digital side
  • 180V DC between the channels
  • Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 47nF capacitor

Supply voltage/power consumption:

  • +5V (4.85V..5.25V), 200mA typ.
  • +24V (external supply voltage 12..32V), 46mA typ.

MTBF: 45,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 110g

Environmental:

Temperature range (operation):

  • 0 to +60°C or -40 to +85°C (screened)
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M066-00 32 binary inputs and/or outputs, 0 to +60°C
04M066-02 32 binary inputs, 0 to +60°C
04M066-03 32 binary inputs and/or outputs, -40 to +85°C screened

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.