Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M67

1-Channel Digital Oscilloscope M-Module

analog voltage input 40 MS/s 0 to +60°C operation
 
M67
  
  • 1 analog voltage input 40 MS/s
  • 12 bits resolution
  • 25 ns acquisition/conversion time
  • ±1 V DC measuring range
  • 4 MB SDRAM
  • Complex trigger logic
  • Oversampling technology
  • Flexible onboard signal conditioning
  • Optical isolation
  • ROHS compliant



Datasheet/Manual:

MEN M67 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M67 is a board for acquisition of analog signals with a bandwidth of up to 10MHz at a maximum resolution of 12 bits and a sampling frequency of up to 40MHz. Variable trigger functions allow application of the M67 as a "digital storage oscilloscope" for measurement and analysis applications.

The sampling data is stored in an onboard memory buffer. After the sampling procedure this buffer can be processed by an external host. Individual signal conditioning is made by the customer using a blank prototype PCB that is plugged directly on M67 and must be ordered separately. MEN can produce individual adapters on request.

The M67 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

Analog Input:

±1V max. input range, 75 Ohm
Input conditioning via adapter PCB

Trigger:

Trigger at signal level, external signal or via software
Rising or falling edge
Trigger at start, middle, end

Clock:

Internal or external clock, max. 40MHz
Divider 2n

Buffer:

4MB
Random access by the host possible

A/D Conversion:

12 bits, 40MSPS
64dB SNR at 3.58MHz
Track/hold
Oversampling technology

Recording:

12 ADC bits and 4 external binary inputs

Binary Inputs/Outputs:

4 inputs
6 outputs

Peripheral Connections:

Via front panel on a shielded combined 15-pin D-Sub receptacle connector

M-Module™ Characteristics:

A08, D16, D32, INTA, DMA, IDENT, TRIGI

Electrical:

Isolation voltage: 500V DC
Supply voltage/power consumption:

  • +5V (4.85V..5.25V), 700mA typ. (with sample adapter)
  • +12V (±5%), +50mA
  • -12V (±5%), -40mA

MTBF: tbd. (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 112g (incl. adapter)

Environmental:

Temperature range (operation):

  • 0 to +60°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M067-00 Digital oscilloscope, 0 to +60°C

Accessories:

05M000-17 25 mounting screw sets to fix M-Modules on carrier boards
05M067-00 Cable for M67: 2x TNC 1.3m, 1x 15-pin D-Sub receptacle
08AD55-00 AD55, adapter for M67, DC signal conditioning, input voltage 0..+1V or 0..+10V, impedance 1MOhm, external triggering, 4 inputs, 5 outputs, temperature range: 0..+60°C

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.