Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro M81

16 Binary Outputs M-Module

16 opto-relay outputs, -40 to +85°C with qualified components
 
M81
  
  • 16 opto-relay outputs
  • 0..36 V output voltage per channel
  • 500 mA output current per channel
  • Thermal and short-circuit protection
  • 500 V DC isolation from the system
  • 100 V DC isolation between the channels
  • -40 to +85°C with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN M81 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M81 is a 16-channel fully isolated, fully protected binary output M-Module™ for industrial applications. The outputs can switch DC as well as AC voltages and can also be used for analog signals. The M81 works with parallel transmission and supports very fast, spike-free switching. The M81 switches relays, lamps or other loads. Typical I/O applications include automated test equipment, simulators and PLC-like applications.

The M81 is software-compatible with M27. The M81 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.
 
 

Specification

Binary Outputs:

Output Voltage: 0..36V
Output Current: Max. 500mA per channel
Switching Times

  • Turn-on time: 700μs typ.
  • Turn-off time: 40μs typ.

Miscellaneous:

Thermal and short circuit protection
Outputs are designed for AC and DC operation

Peripheral Connections:

Via front panel on a shielded 44-pin HD-Sub receptacle connector

M-Module™ Characteristics:

A08, D16, IDENT

Electrical:

Isolation voltage:

  • 500V DC between isolated side and digital side
  • All channels are optically isolated

Supply voltage/power consumption: +5V (4.85V..5.25V), 330mA max.
MTBF: 1,200,000h @ 40°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to M-Module™ Standard
Weight: 72g

Environmental:

Temperature range (operation):

  • -40 to +85°C (qualified components)
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10 to 150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

04M081-00 16 binary outputs, fully isolated, -40..+85°C with qualified components

Accessories:

05M000-00 M-Module cable, 2m, with 25-pin D-Sub plug/housing to pig tail
05M000-17 25 mounting screw sets to fix M-Modules on carrier boards

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.