Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro 0701-0030

3U CompactPCI® 6 Slot 3U / 84 HP System Rack For 6U Cards

For MEN SBCs F11N, F12, F13, F14, F15, F17, F18, 19" Rack Mountable
 
Men Mikro 0701-0030 6U CompactPCI 3U / 84 HP Rack
  
  • 19" rack-mountable
  • IEEE 1101.10/11 compliance
  • 3U / 84 HP system
  • 6U cards horizontal
  • 6-slot 64-bit 6U backplane
  • System slot left
  • Prepared for rear I/O
  • 250 W ATX PSU
  • For MEN SBCs D3, D6, D7, D9



Datasheet/Manual:

MEN 0701-0030 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

This rugged 19" rack-mount CompactPCI® enclosure is very compact in terms of overall size and depth, with six horizontal slots for double-size Eurocards. The 6U backplane supports a 64-bit/66MHz CompactPCI® bus, with the system slot to the left.

The 250W ATX power supply has a 100 to 240V widerange input.

The enclosure gives just the flexibility required to set up a universal embedded solution, e.g. with a Pentium® or PowerPC® based single-board computer and several mezzanine carrier boards for I/O extension. The enclosure can also be used together with rear I/O cards

Ask us for completely configured, wired and tested systems!
 
 

Specification
General System Characteristics:

Compliance with IEC 60 297-3-101, -102, -103, IEEE 1101.10, IEEE 1101.10/11
6 slots for 6U Eurocard boards
6 slots for 6U rear I/O 80mm I/O boards
Hot swap ventilation unit
Mechanical:

19" rack-mount standard, black
6U card horizontal
Dimensions: 3U, 84HP, 275mm depth
Weight: tbd.
Chassis:

Rear I/O bay for 6 horizontal rear I/O boards, 6U, 80 mm depth
CompactPCI® Backplane:

Compliance with CompactPCI® Spec. 2.0 Rev. 3.0 and IEC 61 076-4-101 (connectors)
6-slot
6U with rear I/O on J3/J4/J5
System slot on the left
Power Supply:

Power supply unit
o ATX PSU 250W with wide range input and IEC receptacle
o 100V..240V AC
o 50/60Hz
o Four voltages: 3.3V/14A, 5V/20A, 12V/16A, -12V/0.8 A
Power connector at back-panel
Power-on switch incl. LED at front panel
Environmental:

Temperature range (operation):
o 0..+45°C
o Extended temperature range on request
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Compatibility:

Suited for MEN Boards...
D3
D6
D7
D9
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

0701-0030
CompactPCI® 19" 3U/84HP rack-mount enclosure for 6U cards (horizontal), 6-slot backplane, system slot left, 250W ATX wide-range PSU, 2 fans, prepared for rear I/O

Please refer to datasheet for further information.
Accessories:

0714-0004 Cooling baffle for 6U, 4HP 160mm deep
0714-0008 Filler panel 6U/4HP, IEEE1101, textile gasket
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.