Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro 0701-0041

CompactPCI Express® 8 Slot 4U / 84 HP System Rack For 3U Cards

For MEN SBCs F14, F15, F17, F18, Rack Mountable
 
Men Mikro 0701-0041 3U CompactPCI Express 4U / 84 HP Rack
  
  • 19" rack-mountable
  • IEEE 1101.10/11 compliance
  • 4U / 84 HP system (incl. 1U fan tray)
  • 8-slot hybrid backplane
  • Dual system slot in the middle
  • 3 cPCI Express® peripheral slots to the right
  • 3 cPCI peripheral slots to the left
  • CPCI slots prepared for rear I/O
  • Space for mass storage devices
  • 300 W ATX power supply
  • For MEN SBCs F14, F15, F17, F18



Datasheet/Manual:

MEN 0701-0041 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

This compact 4U rack-mount enclosure is a basic system that allows the configuration with both CompactPCI® Express and CompactPCI® cards. Being a hybrid system, it offers an uncomplicated and cost-effective migration solution from parallel 3U CompactPCI® to serial CompactPCI® Express.

The 8-slot hybrid backplane in this configuration does not need a bridge or an active logic. The four slots on the left are designed for 32-bit CompactPCI® and rear I/O on P2. The four slots on the right are reserved for CompactPCI® Express. The dual CompactPCI® Express system slot is situated in the middle of the backplane and is designed as a 4-link-configuration. Three peripheral slots are accessed with 4 links x 1 lane each. While two of the peripheral slots are accessed with 1 link x1, a third slot is accessed with 2 links x1.

This hybrid system is designed for use with the MEN system-slot SBCs F14, F15, F17 and F18 in combination with the side card F602. This specific side card connects to the CompactPCI® Express side, while the SBCs are plugged on the CompactPCI® side of the system.

That way, the three remaining slots on the CompactPCI® bus and another three slots on the CompactPCI® Express bus can be used to install additional I/O functions.

While the serial CompactPCI® Express bus on the right is best suited for functions like Gigabit Ethernet, 10 Gigabit Ethernet or high end graphic with high data rate requirements, the parallel CompactPCI® bus delivers enough performance for all kinds of conventional I/O like binary or analog signals. For optimum convenience the system is prepared for essential mass storage media: the 3U bay can accommodate several hard disk drives available from MEN. A 300W ATX wide-range power supply unit which is accessible from the front of the system is already included and wired.

The enclosure meets EMC requirements, making it a perfect choice for embedded applications in harsh environments.

Ask us for completely configured, wired and tested systems!
 
 

Specification
General System Characteristics:

Compliance with IEC 60 297-3, IEEE 1101.10
8 slots for 3U Eurocard boards (4 slots with rear I/O)
Mechanical:

19" rack-mount standard
3U card vertical
3U/12HP bay for hard disk drives
Dimensions: 3U, 84HP, 278mm depth
Weight: tbd.
CompactPCI®/CompactPCI® Express Backplane:

8-slot
CompactPCI® System slot on the fourth slot from the left
Three CompactPCI® peripheral slots
CompactPCI® Express System slot on the fourth slot from the right
o Support of four CompactPCI® Express links
Three CompactPCI® Express peripheral slots
o One slot with CompactPCI® Express peripheral slot Type 1
o Two slots with CompactPCI® Express peripheral slot Type 2
Power Supply:

PC power supply PS/2
o 3U/32HP
o ATX-PSU 300W
o 90V..264V AC wide range
o 3,3 V/28 A, 5 V/30 A, 12 V/15 A, -12 V/0,8 A
o Internal 12 VDE fan (ball bearing)
o IEC AC input module with socket
o 47..63Hz
o Agency-approved: CE, UL Recognized Component mark
Front-panel power connectors
Front-panel power-on switch
1U fan chassis:

Two vertical fans
o 12V
o Air flow volume 204 m³/h (manufacturer's data)
o Dimensions 119 x 119 x 32 mm
o Sound power level 6.4 Bel
Environmental:

Temperature range (operation):
o 0..+50°C
Temperature range (storage):
o -40..+85°C
o Power supply: -20..+65°C without derating
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Compatibility:

Suited for MEN Boards...
F14
F15
F17
F18
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

0701-0041
19" 4U/84HP CompactPCI® Express rack-mount enclosure, 8-slot hybrid backplane, space for hard-disk drives, CD-ROM drive, 300W ATX PSU, 1U fan tray with 2 fans included

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.