Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro 0701-0046

CompactPCI® 3 Slot 4U / 24 HP System Rack For 3U Cards

For MEN SBCs F14, F15, F17, F18, Rack Mountable
 
Men Mikro 0701-0046 3U CompactPCI 4U / 24 HP Rack
  
  • 19" desktop or wall-mountable
  • IEEE 1101.10/11 compliance
  • 4U / 24 HP system (incl. 1U fan tray)
  • 3U cards vertical
  • 3-slot 3U backplane
  • System slot right
  • Space for 8 HP power supply
  • For SBCs F11N, F12, F13, F14, F15, F17, F18



Datasheet/Manual:

MEN 0701-0046 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

This ultra-small CompactPCI® system can either be used as a desktop device, being equipped with support feet. Or it can be mounted on a wall by using the separate angular supports that are part of the package. The power supply is located on the bottom of the system (power cable included). The 4U / 24 HP unit comprises an 1U fan tray with a low-noise fan at the bottom.

The 32-bit/33MHz backplane has three vertical slots for 3U Eurocards, with the system slot located on the right. Additional space on the right of the CPU board in the system slot allows to install an I/O side card connected to the CPU board within 8 HP width. The two slots on the left side of the CPU board are free for peripheral slot cards, for example for boards with communication functions (UARTs, Ethernet, WLAN, GSM, GPS) or for mezzanine carrier boards (M-Modules™, PMCs, PC-Cards, Express Cards, PCI Express® MiniCards). Depending on the configuration requirements different types of power supplies may be needed. This system offers an 8 HP space on the left for pluggable 19 power supplies with a P47 connector. The PSU recommended for this system delivers 250W, with a quad supply and 5V max./40A, as well as wide range input between 90 and 264 VAC.

The system meets EMC requirements, making it a perfect choice for embedded applications in rough environments.

Ask us for completely configured, wired and tested systems!
 
 

Specification
General System Characteristics:

Compliance with IEC 60 297-3, IEEE 1101.10
3 slots for 3U Eurocard boards
2 slots for 3U 8HP PSU
Additional space right of the system slot for a side card connected to the CPU board
Mechanical:

Desktop or wall-mounted (19" angular supports included in package)
Fold-out support feet for desktop operation
3U card vertical
Dimensions: 4U, 24HP, 235mm depth
Weight: tbd.
CompactPCI® Backplane:

3-slot
3.3V V(I/O)
CompactPCI® system slot on the right
Two CompactPCI® peripheral slots
Power Supply:

PSU not included
3U slot with P47 power connector for 8HP PSU
Power input at the back at the bottom of the system (cable included)
Power switch at the front
1U fan tray:

One horizontal fan
o 12V
o Air flow volume 95 m³/h (manufacturer's data)
o Dimensions 119 x 119 x 32 mm
o Sound power level 4.3 Bel
o Ventilation direction from the bottom to the top
Environmental:

Temperature range (operation):
o Up to -20..75°C (dependent on system configuration)
Temperature range (storage):
o -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Compatibility:

Suited for MEN Boards...
F11N
F12
F13
F14
F15
F17
F18
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

0701-0046
CompactPCI® 19" 4U/24HP desktop system for 3U cards, 3-slot 3U CompactPCI® backplane, system slot right, 1U fan tray with 1 fan, 8 HP space for 1 pluggable PSU

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.