Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro D3B

6U CompactPCI® MPC8245 SBC With M-Module Expansion

Low Power, Up To 512MB Memory, Dual 10/100 LAN, Quad COM
 
Men Mikro D3B 6U PowerPC cPCI SBC
  
  • PowerPC® MPC8245 with 603e core
  • 1-slot CompactPCI® system slot
  • 512 MB DRAM, CompactFlash®
  • Dual Fast Ethernet
  • 4 COMs, USB, IDE, keyboard/mouse
  • 3 M-Module™ slots
  • MENMON™ BIOS for PowerPC® cards



Datasheet/Manual:

MEN D3B datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The D3 is a single-board computer for embedded applications based on the MPC 8245 PowerPC®. It can be used in a CompactPCI® system slot or as a stand-alone card.

The D3 comes with the MPC8245 PowerPC® with 300MHz clock frequency and a local 32-bit/33-MHz PCI data bus. It is a complete state-of-the-art SBC offering DRAM, Flash and CompactFlash® memory, dual Fast Ethernet, 4 COMs, USB, IDE and keyboard/mouse interfaces as well as an optional onboard hard disk. In addition, the D3B CPU board can be equipped with M-Module™ mezzanine cards. M-Modules™ are recommended for real-world I/O like analog/binary process I/O and instrumentation I/O. The modular combination of I/O functionality on a single-board computer allows to build up tailored control systems which appear as customized solutions based on standard components. Depending on the kind of I/O requirements, further standard versions of D3 are available for other mezzanine standards.

The D3 comes with MENMON™ support. MENMON™ is a sort of BIOS which can be used for bootstrapping operating systems (from disk, flash or network), for hardware testing, or for debugging applications without running any operating system.
 
 

Specification
CPU:

PowerPC®
o MPC8245
o 300MHz
o Double precision FPU
Memory:

L1 Cache integrated in MPC8245
Up to 512MB SDRAM system memory
o One 144-pin SO-DIMM slot for SDRAM modules
o 100MHz memory bus frequency
2MB Flash
Serial EEPROM 2KB for factory settings
CompactFlash® card interface
o Via on-board IDE
o Type I
o True IDE
Mass Storage:

IDE port for hard disk drives
o Drive can be connected via ribbon cable or mounted directly on the CPU board using MEN adapter kit
o Only one CompactPCI® bus slot needed even with hard disk
One IDE port for local CompactFlash®
I/O:

USB
o One USB 1.1 port
o Available via I/O connector
o External PHY
o Data rates up to 12Mbits/s

Ethernet
o Two 10/100Base-T Ethernet channels
o RJ45 connector at front panel with two LEDs

One RS232 UART (COM1)
o RJ45 connector at front panel
o 16-byte transmit/receive buffer
o Handshake lines: CTS, RTS; DCD, DSR, DTR

One UART (COM2)
o Accessible via I/O connector
o Physical interface using SA-Adapter™ via 10-pin ribbon cable on I/O connector
o RS232..RS485, isolated or not: for free use in system (e. g. cable to front)
o 16-byte transmit/receive buffer
o Handshake lines: CTS, RTS; DCD, DSR, DTR; RI

Two UARTs (COM3/COM4)
o Accessible via I/O connector
o Physical interface using SA-Adapter™ via 10-pin ribbon cable on I/O connector
o RS232..RS485, isolated or not: for free use in system (e. g. cable to front)
o Handshake lines: none

Keyboard/mouse
o PS/2 compatible
o External adapters for line drivers required

 
Mezzanine Slots:

Three M-Module™ slots
o Compliant with M-Module™ standard
o Characteristics: D16, D32, A08, A24, INTA, INTC
Miscellaneous:

32-bit/33-MHz, 3.3V V(I/O)
Compliant with PCI Specification 2.2
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
System slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V (+5V tolerant)
PXI™:

Two trigger lines compliant with PXI™ Specification
Electrical Specifications:

Supply voltage/power consumption:
o +5V (-3%/+5%), 1.65A typ.
o ±12V for mezzanines only, tbd.
MTBF: 63,000h @ 50°C (derived from MIL-HDBK-217F)
Mechanical Specifications:

Dimensions: standard double Eurocard, 233.3mm x 160mm
Weight (without mezzanines and accessories): 315g
Environmental:

Temperature range (operation):
o 0 to +60°C or -40 to +85°C
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

MENMON™
Linux
VxWorks®
QNX®
OS-9®
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02D003A00 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 3 PC-MIP® expansion, 0 to +60°C
02D003A01 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 3 PC-MIP® expansion, -40 to +85°C
02D003B00 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 3 M-Modules™ expansion, 0 to +60°C
02D003B01 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 3 M-Modules™ expansion, -40 to +85°C
02D003C00 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 2 PMC expansion, 0 to +60°C
02D003C01 D3B MPC8245 300 MHz, 0 MB RAM, 0 MB CF, 2 MB boot flash, 2 PMC expansion, -40 to +85°C

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.