Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F17

3U CompactPCIŽ/Express Core 2 Duo SBC

Intel® Core™ 2 Duo T7400 or L7400, Up To 2GB Soldered DDR2 Memory
 
MEN F17 3U cPCI Core 2 Duo SBC
  
  • Intel® Core™ 2 Duo T7400 or L7400
  • Dual core 64-bit processor
  • PCI Express® six x1 links
  • 4 HP system master or stand-alone
  • 32-bit CompactPCI® or cPCI Express®
  • Up to 2 GB DDR2 DRAM soldered
  • CompactFlash® slot
  • 2 SATA interfaces
  • Video via VGA and 2 SDVO
  • 2 Gigabit Ethernet (PCIe)
  • Up to 8 USB 2.0
  • High Definition audio
  • Board controller



Datasheet/Manual:

MEN F17 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

Equipped with the Intel® high-performance Core 2 Duo processor T7400 running at 2.16 GHz or the low-voltage L7400 at 1.5 GHz, the F17 is a versatile 4HP/3U (single-slot, single-size Eurocard) single-board computer based on the 64-bit multi-core processor architecture from Intel®. It is designed especially for embedded systems which require high computing and graphics performance and low power consumption. The F17 offers a 32-bit/33-MHz CompactPCI® bus interface and can also be used without a bus system. In combination with a specific side card it can also perform system-slot functionality in a CompactPCI® Express system.

A total of six PCI Express® lanes for high-speed communication (such as Gigabit Ethernet, graphics) are supported on the F17. 2 x1 PCIe links are used for the two on-board Ethernet interfaces. 4 x1 or 1 x4 PCIe links are available on a specific side card.

The DDR2 DRAM is soldered to F17 to guarantee optimum shock and vibration resistance. A robust IDE CompactFlash® device offers nearly unlimited space for user applications. In addition to parallel ATA, two serial ATA lines are available.

The standard I/O available at the front panel of F17 includes graphics on a VGA connector, two PCIe-driven Gigabit Ethernet interfaces and two USB 2.0 ports. The F17 can be extended by different side cards. Additional functions include two digital video inputs for flat panel connection via DVI, a variety of different UARTs or another four USB 2.0 ports, SATA for hard disk or RAID connection and HD audio.The F17 is also prepared for rear I/O where for example another two USB 2.0 ports can be connected.

Two watchdogs for thermal supervision of the processor and board temperature as well as for monitoring the operating system complete the functionality of the F17. The F17 operates in Windows® and Linux environments as well as under real-time operating systems that support Intel®'s multi-core architecture. The Award BIOS was specially designed for embedded system applications. Equipped with Intel® components exclusively from the Intel® Embedded Line, the F17 has a guaranteed minimum standard availability of 5 years.

The F17 is suited for a wide range of industrial applications, e.g. for monitoring, vision and control systems as well as test and measurement. Main target markets comprise industrial automation, multimedia, traffic and transportation, aerospace, shipbuilding, medical engineering and robotics.

The F17 comes with a tailored passive heat sink within 4 HP height. Anyhow, forced air cooling is always required inside the system. The robust design of the F17 make the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F17 is also ready for coating so that it can be used in humid and dusty environments.
 
 

Specification
CPU:

Intel® Core™ 2 Duo T7400 or L7400 (LV)
o Dual-core 64-bit processor
o 2.16GHz or 1.5GHz processor core frequency
o Up to 667MHz front-side bus frequency
Chipset:

Chipset
o Northbridge: Intel® 945GM Express or Intel®® 945GME Express
o Southbridge: Intel® ICH7-M DH
Memory:

4MB L2 cache integrated in Core 2 Duo
Up to 4GB SDRAM system memory
o Soldered
o DDR2
o 667MHz memory bus frequency
o Dual-channel, 2x64 bits

8Mbits boot Flash
Serial EEPROM 2kbits for factory settings

CompactFlash® card interface
o Via on-board IDE
o Type I
o True IDE
o DMA support
Mass Storage:

Parallel IDE (PATA)

  • One IDE port for local CompactFlash®

Serial ATA (SATA)

  • Two channels via side-card connector
  • Transfer rates up to 150MB/s
  • RAID level 0/1 support
Graphics:

Integrated in 945GM Express chipset
200/250MHz 256-bit graphics core
VGA connector at front panel
Two SDVO ports available via side-card connector
Two additional DVI connectors at front panel optional via side card
Simultaneous connection of two monitors
USB:

Two USB 2.0 ports via Series A connectors at front panel
Four USB 2.0 ports via side-card connector
Two USB 2.0 ports via rear I/O on request
UHCI implementation
Data rates up to 480Mbits/s
Ethernet:

Two 10/100/1000Base-T Ethernet channels
RJ45 connectors at front panel
Ethernet controllers are connected by two x1 PCIe® links
On-board LEDs to signal activity status and connection speed
Audio:

Accessible via side-card connector
Front Connections:

VGA
Two USB 2.0 (Series A)
Two Ethernet (RJ45)
Miscellaneous:

Board controller
Real-time clock, buffered by a GoldCap or alternatively a battery (5 years life cycle)
Watchdog timer
Temperature measurement
One user LED
Reset button
PCI Express®:

Two x1 links to connect local 1000Base-T Ethernet controllers - data rate 250MB/s in each direction (2.5 Gbits/s per lane)
One x4 or four x1 links for extension through side-card connector - data rate up to 1GB/s in each direction (2.5 Gbits/s per lane)
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
CompactPCI® Express support (EXP.0 R1.0)
System slot
32-bit/33-MHz CompactPCI® bus
V(I/O): +3.3V (+5V tolerant)
Busless Operation:

Board can be supplied with +5V only, all other voltages are generated on the board
Backplane connectors used only for power supply
Power:

Supply voltage/power consumption:
o +5V (-3%/+5%), approx. 8.8A (5.4A with L7400 processor)
o +3.3V (-3%/+5%), approx. 1.1A
o +12V (-10%/+10%), approx. 10mA
o If the board is supplied with 5V only (typically without a bus connection), the 3.3V are generated on the board and fed to the backplane (3A max.)
MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 4HP with ejector
Weight: 427g
Environmental:

Temperature range (operation):
o 0..+45°C
o 0..+60°C (version with L7400 processor)
o Airflow: min. 15m³/h (1.5m/s)
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 Class A (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst) and EN 61000-4-5 (surge) with regard to CE conformity
BIOS:

Award BIOS
Software Support:

Windows®
Linux
VxWorks® (on request)
QNX® (on request)
Intel® Virtualization Technology, allows a platform to run multiple operating systems and applications in independent partitions; one computer system can function as multiple "virtual" systems
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F017-00 F17, CPCI 3U, Core2Duo T7400 2.16GHz, 2GB DDR, goldcap, 0 to +45°C
02F017-03 F17, CPCI 3U, Core2Duo T7400 2.16GHz, 2GB DDR, battery, 0 to +45°C
02F017-05 F17, CPCI 3U, Core2Duo L7400 1.50GHz, 2GB DDR, battery, 0 to +60°C

Please note that some of these options may only be available for large volumes. Please sales for more information.
Accessories:

02F600-00 2 COM extensions and SATA hard disk slot, for compatible SBCs, -40..+85°C screened
02F601-00 1 DVI-D and 1 audio at front, SATA hard disk slot, for compatible SBCs, 4HP, 0..+60°C
02F601-02 2 DVI-D, 1 audio, 1 COM (via SA-Adapter™) at front, SATA hard disk slot, for compatible SBCs, 8HP, 0..+60°C
02F602-00 3U CompactPCI® to CompactPCI® Express side card with 1 USB, 1 COM, 1 DVI, SATA hard disk slot, for compatible SBCs, 0..+60°C
02F603-00 3U CompactPCI® side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash® slot, for compatible
SBCs, mounted to the right of the SBC, 0..+60°C
02F604-00 3U CompactPCI® side card with 1 IEEE 1394 FireWire, 1 DVI, 1 HD audio and 1 COM extension, SATA hard disk slot, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C
02F605-00 1 XMC or PMC slot, for F14 and compatible SBCs, -40..+85°C with qualified components
02F606-00 2 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter™ not included), SATA hard disk slot, for F14 and compatible SBCs, conformally coated, -40...+85°C screened
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.