Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F206I

3U CompactPCI® ISA PC/104 Carrier Board

Board Supports 1 To 4 PC/104 Slots, -40 To +85°C Operation
 
Men Mikro F206I 3U CompactPCI ISA PC/104 Carrier Board
  
  • 1 CompactPCI slot 32-bit/33-MHz (opt. 66MHz)
  • 4 HP closed front panel
  • 1 to 4 PC/104 slots
  • PCI-to-ISA bridge
  • FPGA 12,000 LEs (approx.144,000 gates)
  • -40 to +85°C with qualified components



Datasheet/Manual:

MEN F206I datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F206I is a 3U 8HP CompactPCI® bus card which provides a PC/104 interface supporting PC/104 extension boards. An on-board PCI-to-ISA bridge links the ISA bus of the PC/104 module with the 32-bit/33- MHz CompactPCI® bus.

The F206I can be configured to work with most PC/104 modules. By default, PCI accesses are translated to 0xDxxxx, so that PC/104 modules which can be jumpered or configured to that address will work without software modification.

For other PC/104 modules, software modifications or modified F206I FPGA content may be necessary. For detailed information as to whether your PC/104 module works with F206I, see the user manual or ask MEN support

Memory as well as I/O access is possible. The interrupt routing can be done in a very flexible way. DMA on the ISA bus is currently not supported but can be made available as an option.

The PCI-to-ISA bridge is realized by means of an FPGA which is loaded automatically after power-up out of a 2MB standard NOR Flash device.

The F206I is delivered with one closed 4HP front panel. Depending on the PC/104 module/s used on the F206I it might be necessary to adapt the required front panels (see MEN accessories) and to provide specific cabling to connect the PC/104 module to the front (please contact PC/104 module manufacturer). The F206I is designed for use in rugged environments. For example, all components are specified for an operation temperature of -40 to +85°C.
 
 

Specification
CompactPCI® to PC/104 bridge:

1 to 4 PC/104 slots
FPGA-controlled
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
V(I/O): +3.3V
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), current depends only on mounted PC/104 modules
o +3.3V (-3%/+5%), > 500mA typ.
MTBF: 316,000h @ 40°C (derived from MIL-HDBK-217F)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Single 3U front panel slot (additional slots may be required for mounted PC/104 boards)
Front panel: aluminum with 1 handle
Weight: 95g
Environmental:

Temperature range (operation):
o -40..+85°C (qualified components)
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

PC/104 drivers as supported
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F206I00 F206I, CompactPCI® 3U, 2-slot carrier board for 1 PC/104 module with 1-slot closed front panel mounted, operation temperature -40..+85°C

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.