Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F207

3U CompactPCI® PCI-104 Carrier Board

For Stacking Of Up To 4 PCI-104 Modules, -40 To +85°C With Qualified Components
 
Men Mikro F207 3U CompactPCI PCI-104 Carrier Board
  
  • 4 HP 32-bit/33-MHz CompactPCI®
  • 1 PCI-104 slot
  • For stacking of up to 4 PCI-104 modules
  • 8 HP CompactPCI® with one PCI-104 module
  • PCI-to-PCI bridge
  • -40 to +85°C with qualified components



Datasheet/Manual:

MEN F207 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F207 is a 3U CompactPCI® bus card which provides a PCI-104 interface supporting up to four PCI-104 extension boards. An on-board PCI-to-PCI bridge provides a 32-bit PCI interface at the PCI-104 connector and a 32-bit/33-MHz interface to the CompactPCI® bus. V(I/O) voltage is 3.3V on the local bus (5V on request) and 3.3V or 5V on CompactPCI®. Two different versions of the F207 offer two different connector positions where a PCI-104 module can be placed. The standard version supports the typical stacking method of PCI-104 devices and needs more than one slot of space in a CompactPCI® system. Another version allows face-to-face assembly. The F207 is fully compliant with railway standard EN 50155. For example, all components are specified for an operation temperature of -40 to +85°C.
 
 

Specification
PCI-104:

One slot for PCI-104
Up to four stacked PCI-104 modules
8HP solution with one PCI-104 module mounted
o Second front panel as needed (filler panel or with connector cut-outs)
Peripheral Connections:

Via front panel
Local PCI Bus:

32-bit/33-MHz, 3.3V or 5V (on request) V(I/O)
Compliant with PCI Specification 2.2
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
Only one slot required on 3U CompactPCI® bus
PCI2050 PCI-to-PCI bridge
o Max. clock frequency 33MHz
o 32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V or +5V (Universal Board)
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), 40mA max. (without PCI-104 module)
o +3.3V (-3%/+5%), 60mA max. (without PCI-104 module)
MTBF: tbd. @ 40°C (derived from MIL-HDBK-217F)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: aluminum with 1 handle
Weight: 170g
Environmental:

Temperature range (operation):
o -40..+85°C
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

PCI-104 drivers as supported
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F207-00 F207, CompactPCI® 3U, 2-slot carrier board for 1 PCI-104 module (slot 1 = closed front panel mounted, slot 2 = to be chosen from accessory list), temperature range -40..+85°C qualified

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.