Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F209

3U CompactPCI® Dual Slot PC Card Carrier

Type I, II & III Support, 16 Bit & 32 Bit Support, -40 to +85°C Screened
 
Men Mikro F209 3U CompactPCI PC Card Carrier
  
  • 4 HP 32-bit/33-MHz CompactPCI®
  • CardBus (32-bit)
  • PCMCIA/PC Card (16-bit)
  • Type I, II and III support
  • Up to 2 PC Cards at front
  • -40 to +85°C screened



Datasheet/Manual:

MEN F209 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F209 is a rugged single Eurocard CompactPCI® carrier board supporting the PCMCIA/PC Card and the subsequent CardBus standards with all card sizes Type I, II and III. It offers two PC Card slots Type I or II at its front panel (or one slot for Type III), needing only one slot on the CompactPCI® bus. Using standard PC cards that give access to the whole world of common notebook PC expansions is a fast and easy way to extend also the functionality of a CompactPCI® system. Thanks to the hot-plug capability of PC Cards which is also supported by the F209, there is no need to open the case, or power down and reboot the whole system. Typical PC Card functions include all types of wired and wireless interfaces for communication purposes as well as memory devices that make the F209 act as a removable data carrier. The F209 is screened for -40 to +85°C operation temperature and prepared for conformal coating in order to be used also in harsh and mobile environments.
 
 

Specification
PC Card Interface:

PC Card Standard 1997 16-/32-bit, 5V/3.3V
o PC Card / PCMCIA (16-bit)
o CardBus (32-bit)
Up to two independent PC Card / CardBus sockets
Two slots Type I (3.3mm) and II (5.0mm), or
One slot Type III (10.5mm)
32-bit/33-MHz PCI interface, master/slave support
Hot insertion and removal
Two activity LEDs with 2-slot, Type-I/II model
PC Card power interface
o +5V/+3.3V: 1A peak (each slot)
o +12V: 150mA peak (each slot)
Note: 16-bit legacy PCMCIA cards may cause interrupt problems!
Front Connections:

Two PC Card / CardBus slots Type I or II, or
One PC Card / CardBus slot Type III
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V (+5V tolerant)
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), depending on plugged PC Card, 50mA max. w/o card
o +3.3V (-3%/+5%), depending on plugged PC Card, 50mA max. w/o card
o ±12V (-5%/+5%), may be used by some PC Cards
MTBF: 2,176,890h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 4HP with ejector
Weight: 150g (w/o PC Card)
Environmental:

Temperature range (operation):
o -40..+85°C (screened, also depending on plugged PC Card)
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

PCI1520 PC Card controller device drivers integrated under Windows® and Linux
PC Card drivers as supported
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F209-00 F209 2 PC-Card slots type I/II (or 1 slot type III) at front panel, -40..+85°C screened (carrier only)

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.