Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F209L

3U CompactPCI® Wireless LAN Interface Board

IEEE 802.11b (Up To 11 Mbits/s Per Channel), -40 to +85°C Screened
 
Men Mikro F209L 3U CompactPCI Wireless LAN Interface Board
  
  • 4 HP 32-bit/33-MHz CompactPCI®
  • IEEE 802.11b
  • Outdoor range up to 600 m
  • Up to 11 Mbits/s per channel
  • Output power 20 dBm
  • Frequency band 2.4 GHz (DSSS)
  • 40-bit or 128-bit WEP encryption
  • 2 Reverse SMA antenna connectors
  • -40 to +85°C screened



Datasheet/Manual:

MEN F209L datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F209L is a rugged single Eurocard CompactPCI® WLAN interface based on a PCMCIA card and needing only one slot on the CompactPCI® bus. It features access safety and offers two rugged antenna connectors at the front panel for the use of external antennae with a radius of up to 600 meters.

The WLAN IEEE 802.11b standard translates into a data rate of up to 11 Mbits/s per channel, an output power of 20 dBm and a 40-bit or 128-bit WEP encryption. The frequency band width is 2.4 GHz with Direct Sequence Spread Spectrum (DSSS). The F209L supports auto fallback. The WLAN interface is a high-power, high sensitivity solution that maintains communication in problematic environments.

The F209L is screened for -40 to +85°C operation temperature and prepared for conformal coating in order to be used also in harsh and mobile environments.
 
 

Specification
WLAN Interface:

IEEE 802.11b compliant
Prism 2.5 chipset
40-bit or 128-bit WEP encryption, MAC filter and Access control
Data rate up to 11Mbits/s per channel, auto fall-back
Frequency band width 2.4GHz with Direct Sequence Spread Spectrum (DSSS)
Outdoor range up to 600m
Two antenna connectors at front panel
o For the use of external antennae
o Rugged screw connection
Output power: 20 dBm (100 mW) typ.
Receiver sensitivity:
o -91 dBm @ 11Mbits/s
o -92 dBm @ 5.5Mbits/s
o -93 dBm @ 2Mbits/s
o -95 dBm @ 1Mbit/s
Supported modulations: CCK (11Mbits/s, 5.5Mbits/s), DQPSK (2Mbits/s), DBPSK (1Mbit/s)
One activity LED
Implemented through on-board PC Card
o Allows easy configuration of IEEE standard through different PC Cards
o IEEE 802.11a, IEEE 802.11b, or IEEE 802.11g
Front Connections:

Two Reverse SMA antenna connectors
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V (+5V tolerant)
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), transmit operation: 400mA max., receive operation: 300mA max., sleep mode: 50mA max.
o +3.3V (-3%/+5%), 50mA max.
MTBF (without WLAN PC card): 3,560,811h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 4HP with ejector
Weight: 180g
Environmental:

Temperature range (operation):
o -40..+85°C (screened, also depending on plugged PC Card)
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

Driver software for Windows® and Linux
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F209L00 WLAN interface IEEE 802.11b, 2 reverse SMA antenna connectors, -40..+85°C screened, inc PC Card antenna

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.