Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F211

3U CompactPCI® Quad Fast Ethernet Interface

Micrel KSZ8841 Controllers, 1500 V Isolation Voltage
 
Men Mikro F210 3U CompactPCI Quad Fast Ethernet Interface
  
  • 4 HP 32-bit/33-MHz CompactPCI®
  • 4 full-duplex or half-duplex channels
  • 10Base-T and 100Base-TX physical layer
  • Fully integrated to comply with IEEE802.3u
  • 1500 V isolation voltage
  • -40 to +85°C with qualified components



Datasheet/Manual:

MEN F211 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F211 is a single Eurocard CompactPCI® networking controller that needs only one slot on the CompactPCI® bus.

The four Fast Ethernet channels on one card occupy four individual MAC/IP addresses. They support full duplex or half-duplex with 10Base-T and 100Base-TX physical layers for distances up to 100 m. Featuring auto-negotiation, collision and link detection the maximum data transfer rate per channel is 200 Mbits/s with full-duplex operation.

The Ethernet channels on the F211 can be used individually as well as in redundant mode for high availability systems by using some of the Ethernet ports in parallel.

The F211 has been designed for rugged and mobile applications with demand for multiple network controllers such as firewalls, gateways, routers, or as a fieldbus data concentrator based on industrial Ethernet.

The F211 is qualified for extended operation temperature and prepared for conformal coating for use in harsh and mobile environments.
 
 

Specification
Ethernet Interfaces:

Four 10/100Base-TX interfaces
Four Micrel KSZ8841 controllers
IEEE802.3x support
o Full-duplex flow control
o Half-duplex back pressure collision flow control
Internal 8KB RX/TX FIFO buffers
Auto-negotiation and auto MDIX crossover
LinkMD® cable diagnostics to determine cable length, cable faults and distance to fault
Media Access Control (MAC) addresses stored in on-board serial EEPROMs
4x2 status LEDs to signal link status, activity, speed and collision
Front Connections:

Four standard 8-pin RJ45 receptacle connectors
CompactPCI® Bus:

Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V or +5V (Universal Board)
Electrical:

Isolation voltage: 1000V between Ethernet links and 1500V between Ethernet links and shield or ground
Supply voltage/power consumption:
o +3.3V (-3%/+5%), 1A max.
MTBF: 875,481h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Weight: 115g (standard version)
Environmental:

Temperature range (operation):
o -40..+85°C (qualified components)
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

Drivers for Windows®, Linux and VxWorks® from Micrel
Driver for QNX® from QNX®
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F211-00 Four 100Base-T Ethernet interfaces, 4 RJ45 connectors at front, -40..+85°C qualified

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.