Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F600

3U CompactPCI® Side Card for SATA/Legacy I/O

4/8 HP Extension For 3U Intel® SBCs F14, F15, F17, F18
 
Men Mikro F600 3U CompactPCI Side Card for SATA/Legacy I/O
  
  • 4/8 HP extension for MEN Boards
  • For 3U Intel® SBCs F14, F15, F17, F18
  • 1-4 COMs via SA-Adapters™
  • Optical isolation depending on SA-Adapter™
  • 2.5" SATA hard-disk slot
  • Additional SATA port for external device
  • -40 to +85°C screened



Datasheet/Manual:

MEN F600 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F600 is a 4HP legacy I/O extension card for 3U Intel® based CompactPCI® single-board computers such as F14, F15, F17, F18 and further boards of the Intel® low power family.

Modern Intel® based boards increasingly support USB interfaces as an exclusive universal connection of devices such as keyboard, mouse, CD-ROM, floppy etc. Especially in industrial applications however many existing systems still use COM interfaces. The F600 provides SA-Adapter™ slots for up to four additional COMs, two at the front panel and two on board. Since SA-Adapters™ provide the physical layers, the F600 can be configured flexibly with a combination of RS232, RS422 or RS485 interfaces, alternatively isolated or not isolated. In addition an on-board 2.5" SATA hard-disk slot can be used on the standard version of the F600, which comes with two COM interfaces.

The F600 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel.
 
 

Specification
I/O:

Up to four UARTs
o From four CPU-controlled USB channels
o Two at front panel
o Two on board, instead of on-board SATA device, on request
o Physical interface using SA-Adapters™ via 10-pin connectors
o RS232..RS422, isolated or not: for free use in system (e. g. cable to front)
o Data rates up to 1 Mbit/s
o FIFO receive and transmit buffers for high data throughput
o Handshake lines: full support; lines depend on SA-Adapters™
Mass Storage:

Serial IDE (SATA)
o One port for on-board 2.5" hard-disk drive
o One port for external device (e.g. SATA DVD Drive)
o Transfer rates up to 150MB/s (depends on hard disk)
o RAID level 0/1 support (depends on CPU board)
Miscellaneous:

CompactPCI® J1 and J2 are assembled for increased mechanical stability and/or for power supply via J1
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), 21mA typ. (with two SA1 SA-Adapters™, w/o hard disk)
o +3.3V (-3%/+5%), 50mA typ. (with two SA1 SA-Adapters™, w/o hard disk)
MTBF: 1,663,000h @ 40°C (derived from MIL-HDBK-217F)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Weight: 145g (w/o hard disk)
Environmental:

Temperature range (operation):
o 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
o Industrial temperature range on request
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

Driver software can be found in the data sheet of the CPU board that you use.
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F600-00 2 COM extensions and SATA hard disk slot, for compatible SBCs, -40..+85°C screened

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.