Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro F603

3U CompactPCI® Side Card USB/COM

4 HP Extension For 3U Intel® SBCs F14, F15, F17, F18
 
MEN Mikro F603 3U CompactPCI Side Card USB/COM
  
  • 4 HP extension for MEN Boards
  • 2 USB 2.0
  • 1 RS-232
  • 2.5" SATA hard-disk slot
  • CompactFlash® slot



Datasheet/Manual:

MEN F603 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F603 is a 4HP mixed USB/COM extension card for 3U Intel® based CompactPCI® single-board computers such as F14, F15, F17, F18 and further boards of the Intel® low power family.

Modern Intel® based boards increasingly support USB interfaces as an exclusive universal connection of devices such as keyboard, mouse, CD-ROM, floppy etc. Especially in industrial applications however many existing systems still use legacy I/O.

Thus, the F603 provides one COM interface as well as two more USB 2.0 interfaces that extend the Single- Board Computer functionality to 4 USB ports at the front panel.

In addition an on-board 2.5" SATA hard-disk slot and a CompactFlash® slot is available on the F603. The F603 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel.
 
 

Specification
I/O:

USB
o Two USB 2.0 ports
o Series A connector at front panel
o UHCI implementation
o Data rates up to 480Mbits/s
o High current up to 1A

UART
o One RS232 at front panel
o Data rates 300bit/s..230kbit/s (up to 1 Mbit/s with shielded cable)
o FIFO receive and transmit buffers for high data throughput
o Handshake lines: full support
Mass Storage:

Serial IDE (SATA)
o One port for on-board 2.5" hard-disk drive
o Transfer rates up to 150MB/s (depends on hard disk)
o RAID level 0/1 support (depends on CPU board)

CompactFlash® card interface
o Via USB to PATA converter
o Type I
o True IDE mode
o Multiword DMA 2 and UDMA 4 support

Please note that operating systems which cannot boot from removable data carriers (e.g. Windows® XP) cannot boot from the CompactFlash® over USB
Miscellaneous:

CompactPCI® J1 is assembled for increased mechanical stability and/or for power supply
Electrical:

Supply voltage/power consumption:
o +5V (-3%/+5%), 50mA typ. (w/o hard disk)
o +3.3V (-3%/+5%), 95mA typ. (w/o hard disk)
MTBF: tbdh @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Mountable on right (standard) or left (option) side of the CPU
Weight: 130g (w/o hard disk and CompactFlash®)
Environmental:

Temperature range (operation):
o 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

Driver software can be found in the data sheet of the CPU board that you use.
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F603-00 3U CompactPCI® side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash® slot, for compatible
SBCs, mounted to the right of the SBC, 0..+60°C

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.