Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F605

3U CompactPCI® Side Card XMC/PMC

4 HP Extension For 3U Intel® SBCs F14, F15, F17, F18
 
Men Mikro F605 3U CompactPCI Side Card XMC/PMC
  
  • 4 HP extension for MEN Boards
  • 1 XMC slot (PCIe 1 x4 link or 2 x1 links)
  • or 1 PMC slot (32/64 bits, 33/66/133MHz, PCI-X)
  • PMC rear I/O support via J2 (only 32-bit backplane)
  • -40 to +85°C with qualified components



Datasheet/Manual:

MEN F605 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F605 is a 4HP XMC or alternatively PMC extension card for 3U Intel® based CompactPCI® single-board computers such as F14, F15, F17, F18 and further boards of the Intel® low power family.

The XMC slot supports either one PCI Express® link with 4 lanes on one XMC connector or 1 link with one lane on each of the two XMC connectors . The PMC slot can be used for 32/64 bit and 33/66 MHz PMC cards and supports up to 133 MHz PCI-X. The board detects automatically whether an XMC or a PMC is plugged.

The F605 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel.
 
 

Specification
XMC Slot:

Via one PCI Express® link with four lanes from the side-card connector
Compliant with XMC standard VITA 42.3-200x
Two configurations adjustable via hex switch
o One PCI Express® link with four lanes on J15 or
o Two links with one lane each on J15 and J16
PMC Slot:

Via PCI Express® to PCI-X Bridge
o Support of PCI-X or PCI local bus specification 2.2
o Support of one PCI Express® link with up to four lanes
32/64-bit, 33/66MHz
PCI-X, 133MHz
Electrical:

Supply voltage/power consumption:
o +12V (-5%/+5%) for XMC and PMC
o +5V (-5%/+5%) for PMC
o +3.3V (-5%/+5%) for XMC and PMC
o -12V (-10%/+10%), 100mA (generated onboard for XMC and PMC)
Power supply must be provided from the backplane via the CompactPCI® J1 connector
MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to CompactPCI® specification for 3U boards
Mountable on right side of the CPU
Weight: 144g (without XMC/PMC)
Environmental:

Temperature range (operation):
o -40..+85°C
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

XMC and PMC drivers as supported
Driver software can be found in the data sheet of the CPU board that you use.
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F605-00 1 XMC or PMC slot, for F14 and compatible SBCs, -40..+85°C with qualified components

Please refer to datasheet for further information.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.