Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro F700

3U CompactPCI® Express XMC/PMC Carrier

Allows Addition Of I/O Functions To A CompactPCI® Express System
 
Men Mikro F216 3U CompactPCI Express XMC/PMC Carrier
  
  • 1 CompactPCI® Express bus slot
  • 1 XMC slot (2 PCI Express® links) or
  • 1 PMC slot (32-bit, 64-bit, PCI-X up to 133MHz)



Datasheet/Manual:

MEN F700 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The F700 is a universal 3U XMC or PMC carrier board for I/O with high speed requirements in a CompactPCI® Express environment. It allows to add I/O functions to a CompactPCI® Express system in a flexible way. Combined with MEN's scalable Intel® Core™ (2) Duo / Pentium® M single-board computer family it can also be used in CompactPCI® / CompactPCI® Express hybrid systems.

The F700 offers instant access to the already existing high-speed XMC modules on the market as well as to the huge range of legacy PMC modules of all different speed types. It supports efficient modular system extension with I/O that reaches from typical computer functions like communication or graphics up to the whole world of industrial functions with analog and binary I/O, measurement, instrumentation, motion control, or fieldbus interfaces.
 
 

Specification
XMC Slot:

Compliant with XMC standard VITA 42.3-200x
Two configurations adjustable via hex switch
o Two PCI Express® links with four lanes each on J15
o Two PCI Express® links with eight lanes each on J15 and J16
PMC Slot:

Via PCI Express® to PCI-X Bridge
o Support of PCI-X or PCI local bus specification 2.2
o Support of one PCI Express® link with up to four lanes
32/64-bit, 33/66MHz
PCI-X, 133MHz
CompactPCI® Express:

Compliance with CompactPCI® Express PICMG EXP.0 R1.0 Specification
CompactPCI® Express connector XP1 for power supply
CompactPCI® Express connectors XJ2 and XJ3 for two
CompactPCI® Express links with one, four or eight lanes each
CompactPCI® Express connector XJ4 for control signals and ground
Electrical:

Supply voltage/power consumption:
o +12V (-5%/+5%) for XMC and PMC (from CompactPCI® Express backplane connector)
o +5V (-5%/+5%) for PMC (from CompactPCI® Express backplane connector)
o +3.3V (-5%/+5%) for XMC and PMC (from CompactPCI® Express backplane connector)
o -12V (-10%/+10%), 100mA (generated onboard for XMC and PMC)
MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: standard single Eurocard
Front panel: 4HP with ejector
Weight: 152g
Environmental:

Temperature range (operation):
o 0..+60°C
o Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

XMC and PMC drivers as supported
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

02F700-00 F700 with 1 XMC or PMC slot, 0..+60°C

Please refer to datasheet for further information.
Accessories:

05F216-00 78-pin HD D-Sub to 8x 9-pin D-Sub cable, 1000 mm, -40..+85°C qualified
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.