Diamond Point International
 
MEN Mikro

MEN Mikro G501

3U compactPCI Serial SATA HDD/SSD Shuttle

PowerPC® CPU 800MHz to 1.5GHz, Up To 2GB Soldered DDR2 Memory

 
MEN Mikro G501 compactPCI Serial SATA HDD/SSD Shuttle
 
  • 4 HP CompactPCI® Serial
  • Peripheral card for proposed PICMG CPCI-S.0
    (under dev.)
  • Hard disk drive or solid state drive shuttle
  • 2.5" SATA HDD/SSD slot
  • Four status LEDs
  • -40 to +85°C with qualified components
  • Compliant with EN 50155
  • ROHS compliant



Datasheet/Manual:

MEN G501 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The G501 is a CompactPCI® Serial hard disk drive carrier board. It is designed to carry a 2.5" SATA hard disk drive (RAID level depending on the CPU) or a solid state drive.

The unit's front panel features LEDs that signalize the board's SGPIO status while a fourth indicates the status of the internal controller's power supply.

 
 

Specification

Mass Storage:

Serial ATA (SATA)

  • One port for onboard 2.5" hard disk drive or solid state drive
  • Transfer rates depending on HDD/SSD
  • RAID level depends on CPU board

External Interfaces:

4 LEDs at front panel

  • 3 for the SGPIO status
  • 1 for the internal controller's supply voltage status

Electrical:

Supply voltage +12V (-3%/+5%), power consumption depending on HDD/SSD
MTBF: tbd. @ 40°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to the proposed PICMG CPCI-S.0 specification (under dev.) for 3U boards
Weight: 125 g (without HDD/SSD)

Environmental:

Temperature range (operation):

  • -40 to +85°C (depending on HDD or SSD; please refer to the HDD/SSD specifications for possible limits)
  • Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:
Board:

02G501-00 1 slot for 2.5" SATA HDD or SSD, -40..+85°C with qualified components (shuttle only)

Accessories:

0710-0018 SATA150 hard disk 2.5" 60GB, 5400rpm, 8MB cache, NCQ, +5..+55°C (incl. mounting screws)
0710-0025 SATA hard disk 2.5", 80 GB, 5400 rpm, 24h/7d, -30..+85°C; N.B.: between -30°C to -20°C power-on time is 12 s typ.
(incl.stand-offs and mounting screws)

02G020-01 Intel Core i7-610E, 2.53 GHz, 4 GB DDR3 DRAM with ECC, 0 to +60°C
02G211-00 4 1000Base-T Ethernet interfaces, 4 RJ45 connectors at front, 0 to +60°C screened
02G211-01 4 1000Base-T Ethernet interfaces, 4 M12 connectors at front, -40 to +85°C screened
02G212-00 compactPCI Serial 2 PCI Express MiniCard slots (USB and PCIe), -40 to +85°C screened
02G213-00 compactPCI Serial PMC/XMC carrier board, -40 to +85°C screened
0701-0056 compactPCI/CompactPCI Serial 19" 4U/84HP rack-mount enclosure for 3U cards (vertical)

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2010 Diamond Point International. All rights reserved.